Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
MPM3610 3.3V Buck Converter Breakout - 21V In 3.3V Out at 1.2A
SKU: AF-4683 | Brand: Adafruit
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 3.3V output with up to 1.2A current. It's great for supplying power to popular 3.3V voltage circuits from a range of ...
Delivered by Wed 8 Jul
5V 1A (1000mA) USB port power supply - UL Listed
SKU: AF-501 | Brand: Adafruit
This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in what...
Delivered by Wed 8 Jul
Adafruit MiniBoost 5V @ 100mA Charge Pump - AP3602A
SKU: AF-3661 | Brand: Adafruit
The Adafruit MiniBoost is a tiny charge-pump voltage booster that converts 3–5 V input to a regulated 5 V output at up to 100 mA. About the size of a linear regulator, it's an easy drop-in solution for battery-powered...
Delivered by Wed 8 Jul
Inductive Charging Set - 3.3V @ 500mA max
SKU: AF-1459 | Brand: Adafruit
This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...
Delivered by Thu 18 Jun
Lithium Ion Polymer Battery - 3.7v 100mAh
SKU: AF-1570 | Brand: Adafruit
A compact 3.7 V lithium-ion polymer (LiPo) battery with approximately 100 mAh capacity (0.4 Wh). Thin, lightweight, and powerful, this cell is suited for small wearable projects, IoT devices, and compact electronics w...
Delivered by Thu 18 Jun
P-channel Power MOSFET - TO-220 Package [25A / 60V]
SKU: AF-1794 | Brand: Adafruit
When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...
Delivered by Thu 18 Jun
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
SKU: AF-2124 | Brand: Adafruit
The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB i...
Delivered by Wed 8 Jul
6 x AA battery holder with 5.5mm/2.1mm plug
SKU: AF-248 | Brand: Adafruit
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...
Delivered by Thu 18 Jun
802.3af PoE Output Data Power Splitter - 12V 1A
SKU: AF-3238 | Brand: Adafruit
This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing regulated 12VDC at up to 1A on a standard 2.1 mm DC barrel jack alongside a standard Ethernet data connection. It let...
Delivered by Thu 18 Jun
PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+
SKU: AF-1903 | Brand: Adafruit
The PowerBoost 500 Basic is a compact DC/DC boost converter that takes input from 1.8V or higher and outputs a steady 5.2V — perfect for powering portable 5V projects from batteries. The slightly elevated 5.2V output ...
Delivered by Wed 8 Jul
Reset / Enable Controller - KA75330 3.3V Voltage Detector
SKU: AF-3428 | Brand: Adafruit
A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a Feather Huzzah running on a lipoly battery every few minutes. Even...
Delivered by Wed 8 Jul
Adafruit MAX17048 LiPoly / LiIon Fuel Gauge and Battery Monitor
SKU: AF-5580 | Brand: Adafruit
The Adafruit MAX17048 LiPoly/LiIon Fuel Gauge and Battery Monitor gives you accurate battery voltage and charge percentage readings for your 1S 3.7–4.2V lithium polymer or lithium ion battery. Instead of guessing rema...
Delivered by Wed 8 Jul
Adafruit INA238 DC Current Voltage Power Monitor
SKU: AF-6349 | Brand: Adafruit
The Adafruit INA238 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...
Delivered by Wed 8 Jul
Adafruit INA237 85V 10A 16-bit DC Current Voltage Power Monitor
SKU: AF-6340 | Brand: Adafruit
The Adafruit INA237 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...
Delivered by Wed 8 Jul
Adafruit USB Type C Power Delivery Dummy - I2C or Switchable
SKU: AF-5991 | Brand: Adafruit
The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...
Delivered by Wed 8 Jul
Adafruit DC Power BFF Add-On for QT Py
SKU: AF-5882 | Brand: Adafruit
The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink...
Delivered by Wed 8 Jul
Adafruit TPL5111 Low Power Timer Breakout
SKU: AF-3573 | Brand: Adafruit
The Adafruit TPL5111 Low Power Timer Breakout turns any electronics project into a low-power system by periodically toggling an enable pin. Connect it to your project's enable line, and the TPL5111 will handle the res...
Delivered by Wed 8 Jul
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
SKU: AF-3848 | Brand: Adafruit
An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electric...
Delivered by Wed 8 Jul
5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+
SKU: AF-3847 | Brand: Adafruit
A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable bo...
Delivered by Wed 8 Jul
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
SKU: AF-3788 | Brand: Adafruit
A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and ...
Delivered by Wed 8 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
