Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Rainbow 34-pin Dual Row IDC Floppy Ribbon Cable - 30cm long
SKU: AF-5453 | Brand: Adafruit
Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow design! Both ends have strain relief and keyed connectors. Perfect ...
Delivered by Wed 5 Aug
GPIO Ribbon Cable 2x10 IDC Cable - 20 pins 12" long
SKU: AF-5294 | Brand: Adafruit
This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct ...
Delivered by Wed 5 Aug
Replacement CSI/DSI Connector for Raspberry Pi - Repair Part
SKU: AF-4728 | Brand: Adafruit
A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire bo...
Delivered by Thu 27 Aug
Micro SD Card PCB Extender
SKU: AF-4395 | Brand: Adafruit
Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD Card Extender. This is a great hack for length constra...
Delivered by Thu 27 Aug
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
SKU: AF-4208 | Brand: Adafruit
A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to yo...
Delivered by Wed 5 Aug
Panel Mount Ethernet Extension Cable
SKU: AF-909 | Brand: Adafruit
This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.The...
Delivered by Thu 27 Aug
Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi
SKU: AF-3671 | Brand: Adafruit
The Adafruit CSI/DSI Cable Extender Thingy lets you connect two 15-pin 1.0mm pitch flex cables end-to-end, extending the cable length for your Raspberry Pi Camera (CSI) or Display (DSI) connection. It handles all the ...
Delivered by Thu 27 Aug
Panel Mount USB Cable - B Female to Mini-B Male
SKU: AF-936 | Brand: Adafruit
A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port t...
Delivered by Thu 27 Aug
Panel Mount Cable USB C to Micro B Male - 30cm
SKU: AF-4056 | Brand: Adafruit
This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a ...
Delivered by Wed 5 Aug
Assembled Pi Cobbler Plus - Breakout Cable [for Pi B+/A+/Pi 2/Pi 3]
SKU: AF-2029 | Brand: Adafruit
The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our ...
Delivered by Wed 5 Aug
2.4GHz Mini Flexible WiFi Antenna with uFL Connector [100mm]
SKU: AF-2308 | Brand: Adafruit
A 100 mm (4″) flexible WiFi antenna with approximately 4 dBi gain and a U.FL (IPEX) connector. The flexible design lets you bend and position the antenna to suit your enclosure or project layout, while the U.FL connec...
Delivered by Thu 27 Aug
HDMI Plug Breakout Board
SKU: AF-3119 | Brand: Adafruit
This HDMI plug breakout board lets you create custom HDMI cables or tap into individual HDMI pins for specialised wiring setups. The solid PCB features an HDMI plug with through-hole pads for soldering your own connec...
Delivered by Thu 27 Aug
Premium Male/Male Raw Jumper Wires - 40 x 6 (150mm)
SKU: AF-3142 | Brand: Adafruit
Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip...
Delivered by Wed 5 Aug
Large Single Row Housing Pack for DIY Jumper Cables
SKU: AF-3146 | Brand: Adafruit
Create custom wire harnesses with these single-row housings for DIY jumper cables. Compatible with both male and female jumper wires, these housings give you full control over your wiring layout and connector configur...
Delivered by Thu 27 Aug
6-pin Socket/Socket IDC cable [6]
SKU: AF-371 | Brand: Adafruit
A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-...
Delivered by Wed 5 Aug
Hook-up Wire Spool Set - 22AWG Stranded-Core - 6 x 25ft
SKU: AF-3111 | Brand: Adafruit
This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's no...
Delivered by Wed 5 Aug
Panel Mount Stereo Audio Extension Cable - 1/8 / 3.5mm
SKU: AF-3319 | Brand: Adafruit
Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty simple: that headphone or microphone jack you know...
Delivered by Thu 27 Aug
HDMI Cable - 1 meter
SKU: AF-608 | Brand: Adafruit
Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet). This is a HDMI 1.3 cable.We're now stocking a very fancy Official Raspb...
Delivered by Thu 27 Aug
GPIO Hammer Headers - Solderless Raspberry Pi Connectors [Male + Female + Installation Jig]
SKU: AF-3413 | Brand: Adafruit
If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty ...
Delivered by Thu 27 Aug
Premium Male/Male Jumper Wires - 40 x 6 (150mm)
SKU: AF-758 | Brand: Adafruit
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header...
Delivered by Thu 27 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
