Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Official Raspberry Pi Micro HDMI to HDMI Cable - 1 meter long
SKU: AF-4302 | Brand: Adafruit
The official Raspberry Pi Micro HDMI to Standard HDMI cable features quality overmoulding with the Pi logo and moulded grips for easy installation. At 1 metre long, it's the perfect length for desktop setups with the ...
Delivered by Tue 25 Aug
JST PH 3-Pin to Female Socket Cable - 200mm
SKU: AF-3894 | Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. We're carrying these to match up with our Hallowing, for extending and conn...
Delivered by Wed 16 Sep
Micro USB to Micro USB OTG Cable - 10 / 25mm
SKU: AF-3610 | Brand: Adafruit
This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you have a "USB On-The-Go (OTG)" device, and you want to plug in anoth...
Delivered by Wed 16 Sep
JST PH 3-Pin to Male Header Cable - 200mm
SKU: AF-3893 | Brand: Adafruit
The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connectio...
Delivered by Tue 25 Aug
Panel Mount USB Cable - B Female to Micro-B Male
SKU: AF-937 | Brand: Adafruit
This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box.The jack half h...
Delivered by Tue 25 Aug
JST-PH Battery Extension Cable - 500mm
SKU: AF-1131 | Brand: Adafruit
A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs includin...
Delivered by Wed 16 Sep
Pogo Pins Needle Head (10 pack) [P75-B1]
SKU: AF-2430 | Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...
Delivered by Wed 16 Sep
Break-away 0.1 36-pin strip male header (10 pieces)
SKU: AF-392 | Brand: Adafruit
Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breakout or breadboard, etc. We go through these guys real fast, and thought ...
Delivered by Tue 25 Aug
Premium Female/Female Jumper Wires - 20 x 3 (75mm)
SKU: AF-1951 | Brand: Adafruit
These premium female-to-female jumper wires are ideal for making wire harnesses or connecting between headers on PCBs. Each pack contains 20 wires in a ribbon cable format — two of each of ten rainbow colours — that c...
Delivered by Tue 25 Aug
Premium Female/Male 'Extension' Jumper Wires - 20 x 3
SKU: AF-1953 | Brand: Adafruit
These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow...
Delivered by Wed 16 Sep
Jumper Shunt with Handle (0.1 / 2.54mm) – 10 Pack
SKU: AF-3525 | Brand: Adafruit
Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've jumped to the right page!This pack of ten (10) 2.54mm jumpers is ...
Delivered by Wed 16 Sep
Adafruit TRRS Jack Breakout Board
SKU: AF-5764 | Brand: Adafruit
The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...
Delivered by Tue 25 Aug
Arcade Button and Switch Quick-Connect Wires - 0.187 (10-pack)
SKU: AF-3835 | Brand: Adafruit
These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.187" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin con...
Delivered by Wed 16 Sep
JST PH 3-Pin Socket to Color Coded Cable - 200mm
SKU: AF-4046 | Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even...
Delivered by Wed 16 Sep
GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3 [2x20 Female Header]
SKU: AF-2222 | Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...
Delivered by Tue 25 Aug
Break-away 0.1 2x20-pin Strip Dual Male Header
SKU: AF-2822 | Brand: Adafruit
If we could eat headers, we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and selling them! This 2x20-pin strip male header is a great way to a...
Delivered by Tue 25 Aug
Mini HDMI to HDMI Cable - 5 feet
SKU: AF-2775 | Brand: Adafruit
Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long (about 5 feet). Perfect for use wi...
Delivered by Wed 16 Sep
Panel Mount Extension USB Cable - Micro B Male to Micro B Female
SKU: AF-3258 | Brand: Adafruit
Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino,...
Delivered by Wed 16 Sep
Premium Male/Male Jumper Wires - 40 x 3 (75mm)
SKU: AF-759 | Brand: Adafruit
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male head...
Delivered by Tue 25 Aug
Premium Female/Male 'Extension' Jumper Wires - 40 x 6 (150mm)
SKU: AF-826 | Brand: Adafruit
A ribbon of 40 premium female-to-male jumper wires, 150mm (6") long, in 10 rainbow colours (4 wires per colour). Each wire has a 0.1" (2.54mm) female header socket on one end and a 0.1" male pin on the other, fitting ...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
