Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
LM3671 3.3V Buck Converter Breakout - 3.3V Output 600mA Max
SKU: AF-2745 | Brand: Adafruit
Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power...
Delivered by Wed 16 Sep
SparkFun Humidity and Temperature Sensor Breakout - Si7021
SKU: SF-SEN-13763 | Brand: SparkFun
A low-cost, highly accurate digital humidity and temperature sensor breakout board based on the Silicon Labs Si7021. Communicates over I²C with just two data lines, providing relative humidity and precise temperature ...
Delivered by Tue 25 Aug
Adafruit Power Relay FeatherWing
SKU: AF-3191 | Brand: Adafruit
The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 1...
Delivered by Wed 16 Sep
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)
SKU: AF-3316 | Brand: Adafruit
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...
Delivered by Wed 16 Sep
Assembled Terminal Block Breakout FeatherWing for all Feathers
SKU: AF-2926 | Brand: Adafruit
The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...
Delivered by Tue 25 Aug
SparkFun RFM69 Breakout (915MHz)
SKU: SF-WRL-12775 | Brand: SparkFun
This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile r...
Delivered by Thu 3 Sep
SparkFun Triple Axis Accelerometer Breakout - ADXL345
SKU: SF-SEN-09836 | Brand: SparkFun
This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...
Delivered by Tue 25 Aug
Adafruit METRO M0 Express - designed for CircuitPython [ATSAMD21G18]
SKU: AF-3505 | Brand: Adafruit
The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a ma...
Delivered by Wed 16 Sep
Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA JST PH QT / Qwiic
SKU: AF-4712 | Brand: Adafruit
The Adafruit LC709203F Fuel Gauge monitors your single-cell LiPo or Li-Ion battery and reports both voltage and state of charge as a percentage over I2C. It handles the non-linear voltage-to-percentage conversion for ...
Delivered by Wed 16 Sep
FLORA Sensor Pack
SKU: AF-1458 | Brand: Adafruit
Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and con...
Delivered by Tue 25 Aug
Adafruit PCM5122 I2S DAC with Line Level Output - HW, I2C or SPI
SKU: AF-6421 | Brand: Adafruit
The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advance...
Delivered by Tue 25 Aug
Adafruit BMP585 Ported I2C / SPI Temperature and Pressure Sensor
SKU: AF-6413 | Brand: Adafruit
The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...
Delivered by Wed 16 Sep
Raspberry Pi Motor Driving Expansion Board (Compatible with Raspberry Pi 4B / 3B+ / 3B / Zero)
SKU: DF-DRI0054 | Brand: DFRobot
##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, st...
Delivered by Thu 3 Sep
USB to Multi-Protocol Serial Adapter: RS-232 / TTL UART / RS-485
SKU: AF-5995 | Brand: Adafruit
DescriptionWhether you need to interface with various serial protocols, this USB to Multi-Protocol Serial adapter has you covered. It supports RS232, TTL UART, RS485, and RS422, all with quick-connect screw terminals...
Delivered by Wed 16 Sep
SparkFun Pulsed Coherent Radar Sensor - Acconeer XM125 (Qwiic)
SKU: SF-SEN-24540 | Brand: SparkFun
Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it c...
Delivered by Thu 3 Sep
Adafruit Proto Doubler PiCowbell for Pico and PicoW
SKU: AF-5906 | Brand: Adafruit
The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...
Delivered by Tue 25 Aug
SparkFun Linear 3D Hall-Effect Sensor - TMAG5273 (Qwiic)
SKU: SF-SEN-23880 | Brand: SparkFun
The SparkFun TMAG5273 Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that detects the presence, strength, and direction of magnetic fields in three dimensions. Built on a standard 25...
Delivered by Thu 3 Sep
SparkFun MOSFET Power Switch and Buck Regulator (Low-Side)
SKU: SF-COM-23979 | Brand: SparkFun
Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...
Delivered by Tue 25 Aug
SparkFun Thing Plus - ESP32-C6
SKU: SF-DEV-22924 | Brand: SparkFun
The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 modul...
Delivered by Thu 3 Sep
SparkFun Human Presence and Motion Sensor - STHS34PF80 (Qwiic)
SKU: SF-SEN-22494 | Brand: SparkFun
The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared