Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Grove Starter Kit for Seeed Studio XIAO
SKU: SS-110010044 | Brand: Seeed Studio
The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, ...
Delivered by Tue 13 Oct
WAVEGO, 12-DOF Bionic Dog-Like Robot, Open Source for ESP32 And PI4B, Facial Recognition, Color Tracking, Motion Detection
SKU: WS-21743 | Brand: Waveshare
WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controlle...
Delivered by Wed 4 Nov
6+1 Microphone Array
SKU: DF-SEN0325 | Brand: DFRobot
A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and...
Delivered by Thu 22 Oct
Adafruit ItsyBitsy nRF52840 Express - Bluetooth LE
SKU: AF-4481 | Brand: Adafruit
The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, ...
Delivered by Tue 13 Oct
SparkFun QwiicBus - EndPoint
SKU: SF-COM-16988 | Brand: SparkFun
The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential si...
Delivered by Thu 22 Oct
SparkFun Thing Plus - ESP32-S2 WROOM
SKU: SF-WRL-17743 | Brand: SparkFun
The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including t...
Delivered by Thu 22 Oct
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
SKU: AF-4886 | Brand: Adafruit
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...
Delivered by Wed 4 Nov
SparkFun Qwiic GPIO
SKU: SF-DEV-17047 | Brand: SparkFun
The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...
Delivered by Tue 13 Oct
SparkFun Qwiic MicroPressure Sensor
SKU: SF-SEN-16476 | Brand: SparkFun
The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's MPR Series piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a wide pressure sensing range of 60mbar to ...
Delivered by Thu 22 Oct
Gravity: PAJ7620U2 Gesture Sensor
SKU: DF-SEN0315 | Brand: DFRobot
Build an awesome interactive project with this PAJ7620U2 Gesture Sensor! It is an interactive sensor with 3D gesture recognition that can recognize 13 gestures at most within 20cm. The sensor offers stable performance...
Delivered by Thu 22 Oct
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals)
SKU: SF-SEN-16295 | Brand: SparkFun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...
Delivered by Tue 13 Oct
Thermistor Module
SKU: LB-24-THERMISTOR | Brand: Little Bird
A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....
Delivered by Tue 13 Oct
SparkFun Qwiic Button Breakout
SKU: SF-BOB-15931 | Brand: SparkFun
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all of those ...
Delivered by Tue 13 Oct
SparkFun RedBoard Artemis
SKU: SF-DEV-15444 | Brand: SparkFun
The SparkFun RedBoard Artemis brings the powerful Artemis module into a familiar Arduino Uno footprint. Built around the Ambiq Apollo3 processor, it runs at 48 MHz (with 96 MHz turbo mode), includes BLE 5.0, and draws...
Delivered by Tue 13 Oct
Circuit Playground Bluefruit - ALPHA - Bluetooth Low Energy
SKU: AF-4333 | Brand: Adafruit
The Circuit Playground Bluefruit builds on the popular Circuit Playground Express by upgrading to an nRF52840 microcontroller with built-in Bluetooth Low Energy. The round board is packed with sensors, LEDs, and input...
Delivered by Wed 4 Nov
Adafruit ATECC608 Breakout Board - STEMMA QT / Qwiic
SKU: AF-4314 | Brand: Adafruit
The Adafruit ATECC608 Breakout provides hardware-based cryptographic security for your microcontroller projects. This crypto-authentication chip from Microchip stores private keys securely — once locked, the keys cann...
Delivered by Wed 4 Nov
SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)
SKU: SF-DEV-15334 | Brand: SparkFun
A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channe...
Delivered by Thu 22 Oct
Lilypad USB Plus
SKU: SF-DEV-14631 | Brand: SparkFun
This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with t...
Delivered by Tue 13 Oct
Mini Black HAT Hack3r - PCB only
SKU: PR-PIM171 | Brand: Little Bird
A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. ...
Delivered by Tue 13 Oct
SparkFun Proximity Sensor Breakout - 20cm, VCNL4040 (Qwiic)
SKU: SF-SEN-15177 | Brand: SparkFun
The SparkFun VCNL4040 Proximity Sensor Breakout detects objects qualitatively up to 20 cm away using infrared proximity sensing. It also includes a built-in ambient light sensor, making it a versatile dual-function mo...
Delivered by Thu 22 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
