Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh
SKU: AF-4489 | Brand: Adafruit
Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...
Delivered by Tue 25 Aug
JST Breakout for E-Textiles and Paper Circuits
SKU: LB-JSTBOARD | Brand: Little Bird
This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...
Delivered by Tue 25 Aug
Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T
SKU: AF-4101 | Brand: Adafruit
The Adafruit MCP9600 I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement for you. Simply connect your thermocouple, wire up I2C, and read accurate temperature data from virtually...
Delivered by Wed 16 Sep
Adafruit PiTFT Plus 320x240 2.8 TFT + Capacitive Touchscreen
SKU: AF-2423 | Brand: Adafruit
The Adafruit PiTFT Plus 2.8" Capacitive Touchscreen is a finger-friendly colour display for the Raspberry Pi. Unlike resistive touchscreens that need a stylus or fingernail, this capacitive version responds to a light...
Delivered by Wed 16 Sep
Adafruit PCM5100 I2S DAC with Line Level Output - 100dB SNR
SKU: AF-6251 | Brand: Adafruit
The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...
Delivered by Wed 16 Sep
Adafruit PiCowbell Camera Breakout - Autofocus 72 Degree Lens
SKU: AF-5945 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...
Delivered by Tue 25 Aug
SparkFun Pro Micro - ESP32-C3
SKU: SF-DEV-23484 | Brand: SparkFun
Don't be fooled by its miniature size; the SparkFun Pro Micro ESP32-C3 packs a punch. This micro marvel crams the powerful ESP32-C3, a single-core RISC-V powerhouse with 400KB of SRAM, into a compact 1.3in. x 0.7in. b...
Delivered by Thu 3 Sep
USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V
SKU: WS-25411 | Brand: Waveshare
USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support ...
Delivered by Tue 25 Aug
Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN Controller
SKU: AF-5728 | Brand: Adafruit
The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN...
Delivered by Tue 25 Aug
Gravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)
SKU: DF-SEN0536 | Brand: DFRobot
The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...
Delivered by Tue 25 Aug
Gravity: BLE Sensor Beacon Pack (5 PCS)
SKU: DF-TEL0149 | Brand: DFRobot
Note: Gravity: BLE sensor beacons need to be configured using the 3.3V USB-TTL tool. This Gravity wireless BLE Sensor Beacon with built-in 11-bit ADC is capable of collecting data from digital and analog sensors a...
Delivered by Thu 3 Sep
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
SKU: AF-5640 | Brand: Adafruit
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connector...
Delivered by Tue 25 Aug
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Tue 25 Aug
SparkFun Level Shifter - 8 Channel (TXS01018E)
SKU: SF-BOB-19626 | Brand: SparkFun
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at diff...
Delivered by Thu 3 Sep
SparkFun Qwiic Mini ToF Imager - VL53L5CX
SKU: SF-SEN-19013 | Brand: SparkFun
The SparkFun Qwiic Mini ToF Imager is a 64-pixel Time-of-Flight ranging sensor built around the STMicroelectronics VL53L5CX. It provides multizone distance measurements up to 4000 mm across a 4×4 or 8×8 grid with a 63...
Delivered by Thu 3 Sep
4-Channel Level Converter (12V to 3.3V)
SKU: DF-DFR0913 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...
Delivered by Tue 25 Aug
SparkFun Qwiic EEPROM Breakout - 512Kbit
SKU: SF-COM-18355 | Brand: SparkFun
The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512 kilo-bits (or 64 kilo-bytes) of storage, this product is great for any microcontroller ...
Delivered by Thu 3 Sep
Adafruit Metro ESP32-S2
SKU: AF-4775 | Brand: Adafruit
The Adafruit Metro ESP32-S2 combines the popular Arduino UNO shield-compatible Metro form factor with the ESP32-S2 WiFi module. Featuring native USB, 4 MB flash, and 8 MB PSRAM, this board is ideal for WiFi-connected ...
Delivered by Tue 25 Aug
Mini Basic PIR Sensor - BS412
SKU: AF-4666 | Brand: Adafruit
A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-...
Delivered by Wed 16 Sep
Adafruit LSM6DSOX + LIS3MDL FeatherWing - Precision 9-DoF IMU
SKU: AF-4565 | Brand: Adafruit
The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift an...
Delivered by Wed 16 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
