Brands and Manufacturers

SKU: PI-PIM726 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with all the goodies - 16MB of flash, 8MB of PSRAM, USB-C, Qw/ST and 2.4GHz wireless / Bluetooth.We adore the versatility and value of Raspberry Pi Pico but we als...

SKU: AF-5933 | Brand: Adafruit

The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-s...

SKU: WS-13460 | Brand: Waveshare

NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufact...

SKU: LB-LR0214-4 | Brand: Little Bird

The D1 R2 is a mini wifi board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) A Micro USB connection A power jack, 9-...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: WS-24580 | Brand: Waveshare

RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor RP2040-Touch-LCD-1.28 Based on Raspberry Pi RP2040 ...

SKU: SF-BOB-18012 | Brand: SparkFun

Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. O...

SKU: LB-LS1697 | Brand: Little Bird

This is the Light and Colour Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and colour measuring, proximity detection, and touch-less gesture sensing. With this Light...

SKU: LB-IBIS | Brand: Little Bird

Micro:bit Power Supply Module 3.3V 2A is a kind of power module for micro:bit. The output voltage of 3.3v can be connected directly to the battery connector of the micro:bit, providing strong and steady power suppl...

SKU: AF-5400 | Brand: Adafruit

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provid...

SKU: AF-3405 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...

SKU: DF-DFR0473 | Brand: DFRobot

Introducing the Gravity Digital Relay Module - the latest addition to DFRobot's Gravity series! This module is a little different to the other relays in our store - not only is it compatible with 5V Arduino boards, bu...

SKU: PI-PIM724 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP...

SKU: AF-5396 | Brand: Adafruit

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between...

SKU: PR-PIM300 | Brand: Little Bird

The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin hei...

SKU: LB-LR0401 | Brand: Little Bird

Product Overview The L3G4200D Gyroscope Module is a low power 3-Axis angular rate sensor with temperature data. The gyroscope shows the rate of change in rotation on its X,Y and Z axes. Temperature output data and...

SKU: LB-ETEXTILEADXL335 | Brand: Little Bird

This three-axis accelerometer is designed for e-textiles projects and is based on the ADXL335 MEMS accelerometer from Analog Devices. It can be used to detect joint movement, inclination and vibration.The board provid...

SKU: SF-DEV-14495 | Brand: SparkFun

The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...

SKU: WS-25376 | Brand: Waveshare

Full metal body · Onboard ESP32-WROOM-32 · Multiple host support The WAVE ROVER is a rugged, all-metal 4WD robot chassis for makers, students and researchers who want a capable mobile platform without building one fro...

SKU: AF-5714 | Brand: Adafruit

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software...