Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit DragonTail for micro:bit - Fully Assembled
SKU: AF-3695 | Brand: Adafruit
The Adafruit DragonTail for micro:bit breaks out all of the micro:bit's edge connector pads to standard 0.1" headers for easy breadboard use. Simply slot your micro:bit into the card-edge connector and every pin — inc...
Delivered by Mon 13 Jul
Adafruit Feather 32u4 Bluefruit LE
SKU: AF-2829 | Brand: Adafruit
The Feather 32u4 Bluefruit LE combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging in one compact board. BLE is supported by all modern smartphones and...
Delivered by Mon 13 Jul
pin:bit
SKU: PR-PIM352 | Brand: Little Bird
pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly. It's ideal for building small circuits on a breadboard, ...
Delivered by Tue 23 Jun
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
SKU: DF-DFR0477 | Brand: DFRobot
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...
Delivered by Thu 2 Jul
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Tue 23 Jun
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Thu 2 Jul
OLED Breakout Board - 16-bit Color 0.96 w/microSD holder
SKU: AF-684 | Brand: Adafruit
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-...
Delivered by Mon 13 Jul
SparkFun Human Presence Sensor Breakout - AK9753 (Qwiic)
SKU: SF-SEN-14349 | Brand: SparkFun
This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled, 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view...
Delivered by Thu 2 Jul
Adafruit Feather 32u4 Bluefruit LE with Stacking Headers - Assembled
SKU: AF-3242 | Brand: Adafruit
The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you ca...
Delivered by Mon 13 Jul
OLED Breakout Board - 16-bit Color 1.27 w/microSD holder
SKU: AF-1673 | Brand: Adafruit
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. ...
Delivered by Mon 13 Jul
Air Quality Monitor (PM 2.5, Formaldehyde, Temperature Humidity Sensor)
SKU: DF-SEN0233 | Brand: DFRobot
A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemica...
Delivered by Tue 23 Jun
XBee 2mW Wire Antenna - Series 2 (ZB)
SKU: DF-TEL0020 | Brand: DFRobot
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Th...
Delivered by Thu 2 Jul
Arduino DUE - An Arduino Microcontroller Board
SKU: DF-DFR0220 | Brand: DFRobot
The Arduino Due is Arduino's first ARM-based development board, powered by the Atmel SAM3X8E — a 32-bit Cortex-M3 processor running at 84MHz. With 54 digital I/O pins, 12 analogue inputs, 2 DAC outputs, and USB-OTG, i...
Delivered by Thu 2 Jul
LilyPad Arduino USB - ATmega32U4 Board
SKU: SF-DEV-12049 | Brand: SparkFun
The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the ...
Delivered by Tue 23 Jun
SparkFun Triple Axis Accelerometer Breakout - LIS3DH
SKU: SF-SEN-13963 | Brand: SparkFun
The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three addi...
Delivered by Thu 2 Jul
RFM69HCW Wireless Transceiver - 434MHz
SKU: SF-COM-13910 | Brand: SparkFun
This is the 434MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medici...
Delivered by Thu 2 Jul
MinIMU-9 v2 Gyro, Accelerometer, and Compass
SKU: PL-1268 | Brand: Pololu
The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...
Delivered by Tue 23 Jun
MinIMU-9 Gyro, Accelerometer, and Compass
SKU: PL-1265 | Brand: Pololu
This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...
Delivered by Tue 23 Jun
SparkFun Triple Axis Accelerometer Breakout - ADXL362
SKU: SF-SEN-11446 | Brand: SparkFun
A breakout board for the Analog Devices ADXL362, a 3-axis MEMS accelerometer that operates at ultra-low power consumption. It measures both dynamic acceleration (motion, shock) and static acceleration (tilt), and comm...
Delivered by Thu 2 Jul
SparkFun SAMD21 Mini Breakout
SKU: SF-DEV-13664 | Brand: SparkFun
If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSA...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
