Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Xbee USB adapter (FTDI ready)
SKU: DF-DFR0050 | Brand: DFRobot
The DFRobot XBee USB Adapter connects XBee and Bluetooth modules to your PC via mini USB for configuration, wireless data transmission, and firmware programming. It uses an FTDI232 USB-to-UART converter chip for stabl...
Delivered by Fri 14 Aug
Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger [v1]
SKU: AF-1905 | Brand: Adafruit
The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your batt...
Delivered by Thu 27 Aug
Adafruit Pro Trinket - 5V
SKU: AF-2000 | Brand: Adafruit
Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a c...
Delivered by Wed 5 Aug
Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi
SKU: AF-3589 | Brand: Adafruit
The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, g...
Delivered by Wed 5 Aug
Micro-USB to 5Pin Terminal 30cm
SKU: LB-LS7522 | Brand: Little Bird
A 30cm breakout cable with a Micro-USB plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without sold...
Delivered by Wed 5 Aug
Raspberry Pi Compute Module 5 IO Board
SKU: DF-DFR1211 | Brand: DFRobot
Introduction The Raspberry Pi Compute Module 5 IO Board (CM5IO) is a powerful development platform designed to integrate the Compute Module 5 (CM5) into industrial and embedded applications. Offering extensive connect...
Delivered by Fri 14 Aug
Raspberry Pi Compute Module 5 IO Case with DC Brushless Fan
SKU: DF-FIT1014 | Brand: DFRobot
The official Raspberry Pi IO Case is a two-piece sheet metal enclosure for the Compute Module 5 and CM5 IO Board. It provides space for accessories such as an M.2 SSD or PoE+ HAT+, includes slots for CSI-2 cameras and...
Delivered by Fri 14 Aug
RainbowLink 4 Channel USB to Serial Converter (RS485 / RS232 / TTL)
SKU: DF-TEL0185 | Brand: DFRobot
Introduction RainbowLink is a high-performance USB protocol converter designed for multi-channel serial communication and power output, making it ideal for IoT and industrial applications. It integrates four independe...
Delivered by Wed 5 Aug
Industrial USB to RS485/422 Isolated Converter with FT232RL and SP485EEN
SKU: WS-23949 | Brand: Waveshare
The USB to RS485/422 is an industrial-grade isolated converter designed for reliable and stable communication. Featuring an original FT232RL chipset and SP485EEN transceiver, it ensures fast, interference-free data tr...
Delivered by Wed 5 Aug
7.3-inch E-Ink Display with Wood Frame – 800x480, Ultra-Long Standby
SKU: WS-30315 | Brand: Waveshare
The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and ...
Delivered by Thu 27 Aug
Adafruit SHT41 Trinkey - USB Temperature and Humidity Sensor
SKU: AF-5912 | Brand: Adafruit
The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading...
Delivered by Thu 27 Aug
Arduino Giga R1 WiFi
SKU: SF-WRL-23319 | Brand: SparkFun
The Arduino GIGA R1 WiFi is a powerful development board built around the STM32H747XI dual-core microcontroller, featuring a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz. With 2 MB flash and 1 MB RAM, it handles de...
Delivered by Fri 14 Aug
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Wed 5 Aug
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Thu 27 Aug
Adafruit ESP32-S3 Reverse TFT Feather
SKU: AF-5691 | Brand: Adafruit
The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an e...
Delivered by Thu 27 Aug
Magnetic Right Angle USB Type C Adapter - 120W Data and Power
SKU: AF-5521 | Brand: Adafruit
A magnetic right-angle USB-C adapter that handles up to 120 W of power and supports data transfer. Insert the magnetic nub into your device's USB-C port, then snap your cable onto it magnetically — giving you a quick-...
Delivered by Thu 27 Aug
Adafruit ItsyBitsy nRF52840 Express - Bluetooth LE
SKU: AF-4481 | Brand: Adafruit
The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, ...
Delivered by Wed 5 Aug
Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch
SKU: AF-5020 | Brand: Adafruit
The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into an...
Delivered by Wed 5 Aug
PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet
SKU: AF-4552 | Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...
Delivered by Wed 5 Aug
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
SKU: AF-4471 | Brand: Adafruit
The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from P...
Delivered by Thu 27 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared