Brands and Manufacturers

SKU: SF-GPS-21305 | Brand: SparkFun

The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated...

SKU: SF-GPS-23088 | Brand: SparkFun

The SparkFun Triband GNSS RTK Breakout features Septentrio's mosaic-X5, an ultra-low power multi-band, multi-constellation GNSS receiver capable of delivering centimeter-level precision. Supporting L1, L2, and L5 band...

SKU: WS-25116 | Brand: Waveshare

The UART-WIFI232-B2 is an industrial-grade embedded module that provides bidirectional transparent transmission between TTL serial (UART), WiFi (802.11b/g/n), and 100 Mbps Ethernet. It functions as a serial server, Mo...

SKU: DF-SEN0560 | Brand: DFRobot

This ultrasonic time-of-flight (ToF) material detection sensor identifies surface materials by analysing the difference in ultrasonic echo energy reflected from various surfaces. It can distinguish between hard and so...

SKU: DF-SEN0554 | Brand: DFRobot

This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the light transmittance and scattering rate of the liquid in trans...

SKU: DF-DFR1022 | Brand: DFRobot

DTOF Ranging MethodThanks to the DTOF (Direct Time-of-Flight) technology developed by SLAMTEC, RPLIDAR S2 guarantees consistent ranging resolution. Even in longer distance, the resolution always keeps the same. Also, ...

SKU: DF-DFR1023 | Brand: DFRobot

The RPLiDAR S2L is a 360° laser range scanner from SLAMTEC using Direct Time-of-Flight (DTOF) ranging technology. It delivers consistent resolution regardless of distance and can detect objects of virtually any materi...

SKU: DF-SEN0519 | Brand: DFRobot

The DFRobot URM15 is an industrial-grade ultrasonic ranging sensor with an IP65-rated waterproof probe. It provides an effective measuring range of 30–500 cm (tested against a flat wall) and communicates via an RS485 ...

SKU: SF-KIT-20673 | Brand: SparkFun

The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an ope...

SKU: SF-KIT-20683 | Brand: SparkFun

The Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artem...

SKU: AF-5587 | Brand: Adafruit

If you're like me and have trouble keeping your calatheas and pepperomias happy and not overwatering them to root rot ruin, why not take a gander at the Plant Monitor from Ada-friend Monk Makes. Its a super easy and f...

SKU: AF-5568 | Brand: Adafruit

The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATme...

SKU: SF-GPS-18378 | Brand: SparkFun

The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal acc...

SKU: SF-GPS-19663 | Brand: SparkFun

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered d...

SKU: SF-KIT-19935 | Brand: SparkFun

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikro...

SKU: DF-SEN0473 | Brand: DFRobot

This is a sensor that detects hydrogen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ...

SKU: SF-SEN-18737 | Brand: SparkFun

The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis. This sensor can be used completely standalone or via USB with a host like normal USB-only variants of DepthAI. It has a built-in ...

SKU: DF-SEN0471 | Brand: DFRobot

This is a sensor that detects nitrogen dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0474 | Brand: DFRobot

This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentr...

SKU: DF-SEN0472 | Brand: DFRobot

This is a sensor that detects ozone concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ozo...