Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
SKU: AF-1602 | Brand: Adafruit
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...
Delivered by Wed 4 Nov
Adafruit Music Maker MP3 Shield for Arduino (MP3/Ogg/WAV...)
SKU: AF-1790 | Brand: Adafruit
The Adafruit Music Maker MP3 Shield turns any Arduino into a versatile audio player, recorder, and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats...
Delivered by Wed 4 Nov
Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)
SKU: AF-2809 | Brand: Adafruit
The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...
Delivered by Wed 4 Nov
SparkFun microSD Transflash Breakout
SKU: SF-BOB-00544 | Brand: SparkFun
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect fo...
Delivered by Thu 22 Oct
Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz
SKU: AF-3071 | Brand: Adafruit
The Adafruit RFM69HCW Transceiver Radio Breakout @ 433 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX1231 t...
Delivered by Wed 4 Nov
6-pin Socket/Socket IDC cable [6]
SKU: AF-371 | Brand: Adafruit
A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-...
Delivered by Tue 13 Oct
SparkFun Shift Register Breakout - 74HC595
SKU: SF-BOB-10680 | Brand: SparkFun
A breakout board for the SOIC version of the 74HC595 8-bit shift register IC. Shift registers let you expand the number of digital outputs available on your microcontroller by clocking in serial data and latching it t...
Delivered by Tue 13 Oct
SparkFun MP3 Player Shield
SKU: SF-DEV-12660 | Brand: SparkFun
The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. Wi...
Delivered by Tue 13 Oct
74LVC245 - Breadboard Friendly 8-bit Logic Level Shifter
SKU: AF-735 | Brand: Adafruit
An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like ...
Delivered by Wed 4 Nov
Adafruit 1.8 Color TFT Shield w/microSD and Joystick
SKU: AF-802 | Brand: Adafruit
The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. T...
Delivered by Tue 13 Oct
SparkFun microSD Sniffer
SKU: SF-TOL-09419 | Brand: SparkFun
The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card int...
Delivered by Thu 22 Oct
Arduino UNO R4 WiFi Development Board
SKU: DF-DFR1084 | Brand: DFRobot
The Arduino UNO R4 WiFi is the latest evolution of the iconic UNO series, powered by the Renesas RA4M1 (Arm Cortex-M4) processor running at 48 MHz — a 3× speed increase over the UNO R3. With 256 KB flash, 32 KB SRAM, ...
Delivered by Thu 22 Oct
Adafruit Proto Tripler PiCowbell for Pico and PicoW
SKU: AF-5967 | Brand: Adafruit
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It al...
Delivered by Tue 13 Oct
Romeo ESP32-S3 Development Board for Robotics FPV RC Car
SKU: DF-DFR0994 | Brand: DFRobot
Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...
Delivered by Tue 13 Oct
Arduino Giga R1 WiFi
SKU: SF-WRL-23319 | Brand: SparkFun
The Arduino GIGA R1 WiFi is a powerful development board built around the STM32H747XI dual-core microcontroller, featuring a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz. With 2 MB flash and 1 MB RAM, it handles de...
Delivered by Thu 22 Oct
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
SKU: SF-ROB-22132 | Brand: SparkFun
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...
Delivered by Thu 22 Oct
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Tue 13 Oct
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Wed 4 Nov
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Tue 13 Oct
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared