Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT
SKU: AF-4600 | Brand: Adafruit
The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found ...
Delivered by Tue 13 Oct
Flora Lux Sensor - TSL2561 Light Sensor [v1.0]
SKU: AF-1246 | Brand: Adafruit
Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...
Delivered by Tue 13 Oct
Adafruit 16x8 LED Matrix Driver Backpack - HT16K33 Breakout
SKU: AF-1427 | Brand: Adafruit
The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...
Delivered by Tue 13 Oct
Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi
SKU: AF-1754 | Brand: Adafruit
The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read...
Delivered by Tue 13 Oct
Quad Alphanumeric Display - White 0.54 Digits w/ I2C Backpack
SKU: AF-2157 | Brand: Adafruit
Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...
Delivered by Tue 13 Oct
Arduino Pro Mini 328 - 5V/16 MHz
SKU: AF-2378 | Brand: Adafruit
The Arduino Pro Mini is SparkFun's minimal design approach to Arduino. It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board. There are no connectors attached -...
Delivered by Tue 13 Oct
Adafruit LED Charlieplexed Matrix - 9x16 LEDs - Yellow
SKU: AF-2948 | Brand: Adafruit
The Adafruit LED Charlieplexed Matrix is a 9×16 grid of yellow LEDs arranged in a Charlieplexed configuration. Designed to pair with the IS31FL3731 LED matrix driver, this display lets you create scrolling text, anima...
Delivered by Tue 13 Oct
i2c / SPI character LCD backpack
SKU: AF-292 | Brand: Adafruit
LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...
Delivered by Tue 13 Oct
JST-SH 4-pin Cable with Micro SMT Test Hooks
SKU: AF-5037 | Brand: Adafruit
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.On on...
Delivered by Tue 13 Oct
Adafruit 24LC32 I2C EEPROM Breakout - 32Kbit / 4 KB - Stemma QT
SKU: AF-5146 | Brand: Adafruit
The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist ...
Delivered by Tue 13 Oct
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - White
SKU: AF-3149 | Brand: Adafruit
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolli...
Delivered by Tue 13 Oct
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board - Fully Assembled
SKU: AF-3515 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Tue 13 Oct
Monochrome 128x32 I2C OLED graphic display
SKU: AF-931 | Brand: Adafruit
A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast,...
Delivered by Tue 13 Oct
Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016
SKU: AF-1712 | Brand: Adafruit
A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c ...
Delivered by Tue 13 Oct
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - FeatherWing Only - no matrices!
SKU: AF-3088 | Brand: Adafruit
The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two sha...
Delivered by Tue 13 Oct
Adafruit 8x16 LED Matrix FeatherWing w/o Matrices
SKU: AF-3090 | Brand: Adafruit
Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just tw...
Delivered by Tue 13 Oct
Project Kit for Android Things™
SKU: AF-3227 | Brand: Adafruit
Welcome to the Internet of Things with Google! Whether you are a device creator prototyping a new design for production, or a hobbyist looking for an introduction to the new Android Things API, you've come to th...
Delivered by Tue 13 Oct
Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD
SKU: AF-715 | Brand: Adafruit
The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connecti...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared