Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit
SKU: AF-2348 | Brand: Adafruit
The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...
Delivered by Thu 18 Jun
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
SKU: AF-1438 | Brand: Adafruit
The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. D...
Delivered by Wed 8 Jul
Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
SKU: AF-2345 | Brand: Adafruit
The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can k...
Delivered by Wed 8 Jul
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit [MPR121]
SKU: AF-2340 | Brand: Adafruit
The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...
Delivered by Thu 18 Jun
Bi-Color (Red/Green) 24-Bar Bargraph w/I2C Backpack Kit
SKU: AF-1721 | Brand: Adafruit
A 24-bar bi-colour (red/green) LED bargraph kit with an I²C backpack controller. The backpack handles all LED multiplexing and drive, letting you control 48 LEDs (24 bars × 2 colours) from just two I²C pins. Constant-...
Delivered by Thu 18 Jun
Monochrome 2.42 128x64 OLED Graphic Display Module Kit
SKU: AF-2719 | Brand: Adafruit
If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display i...
Delivered by Wed 8 Jul
Adafruit Prop-Maker Starter Kit - Make your own Lightsaber!
SKU: AF-4860 | Brand: Adafruit
The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop...
Delivered by Wed 8 Jul
Adafruit 4x4 NeoTrellis Feather M4 Kit Pack
SKU: AF-4352 | Brand: Adafruit
Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons eac...
Delivered by Wed 8 Jul
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - Red
SKU: AF-3152 | Brand: Adafruit
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in red pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling...
Delivered by Wed 8 Jul
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - Yellow
SKU: AF-3153 | Brand: Adafruit
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in yellow pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scroll...
Delivered by Wed 8 Jul
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - Green
SKU: AF-3151 | Brand: Adafruit
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in green pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolli...
Delivered by Wed 8 Jul
Monochrome 2.7 128x64 OLED Graphic Display Module Kit
SKU: AF-2674 | Brand: Adafruit
If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...
Delivered by Wed 8 Jul
Monochrome 2.3 128x32 OLED Graphic Display Module Kit
SKU: AF-2675 | Brand: Adafruit
If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...
Delivered by Wed 8 Jul
Adafruit Arcade Bonnet for Raspberry Pi with JST Connectors [Mini Kit]
SKU: AF-3422 | Brand: Adafruit
The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+...
Delivered by Wed 8 Jul
RGB LCD Shield Kit w/ 16x2 Character Display - Only 2 pins used! [POSITIVE DISPLAY]
SKU: AF-716 | Brand: Adafruit
This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and k...
Delivered by Wed 8 Jul
Adafruit UNTZtrument! Open-Source 8x8 Grid Controller Kit [8x8 White LEDs]
SKU: AF-1929 | Brand: Adafruit
Build your own open-source 8×8 button grid controller with the Adafruit UNTZtrument kit. Designed by PaintYourDragon and based on the Adafruit Trellis platform, this DIY kit features 64 translucent silicone buttons wi...
Delivered by Wed 8 Jul
Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD
SKU: AF-715 | Brand: Adafruit
The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connecti...
Delivered by Thu 18 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
