Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Gravity: UV Index Sensor (240-370nm, UVA, UVB, UVC)
SKU: DF-SEN0636 | Brand: DFRobot
The Gravity UV Index Sensor measures ultraviolet radiation across the 240–370 nm wavelength range, covering UVA, UVB, and UVC bands. It directly outputs a UV index (0–11) and a harm risk level (1–5), eliminating the n...
Delivered by Fri 14 Aug
Gravity: mmWave C4001 24GHz Human Presence Detection Sensor (12 Meters, I2C & UART)
SKU: DF-SEN0610 | Brand: DFRobot
##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...
Delivered by Fri 14 Aug
Arduino UNO R4 WiFi Development Board
SKU: DF-DFR1084 | Brand: DFRobot
The Arduino UNO R4 WiFi is the latest evolution of the iconic UNO series, powered by the Renesas RA4M1 (Arm Cortex-M4) processor running at 48 MHz — a 3× speed increase over the UNO R3. With 256 KB flash, 32 KB SRAM, ...
Delivered by Fri 14 Aug
Adafruit Proto Tripler PiCowbell for Pico and PicoW
SKU: AF-5967 | Brand: Adafruit
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It al...
Delivered by Wed 5 Aug
Adafruit Terminal PiCowbell for Pico with Pre-Soldered Sockets
SKU: AF-5907 | Brand: Adafruit
The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...
Delivered by Wed 5 Aug
Adafruit Grove and Stemma QT FeatherWing for all Feathers
SKU: AF-5862 | Brand: Adafruit
The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical...
Delivered by Thu 27 Aug
SparkFun Photoacoustic Spectroscopy CO2 Sensor - PASCO2V01 (Qwiic)
SKU: SF-SEN-22956 | Brand: SparkFun
The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...
Delivered by Fri 14 Aug
Gravity: H2S Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0467 | Brand: DFRobot
This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...
Delivered by Fri 14 Aug
Romeo ESP32-S3 Development Board for Robotics FPV RC Car
SKU: DF-DFR0994 | Brand: DFRobot
Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...
Delivered by Wed 5 Aug
Arduino Giga R1 WiFi
SKU: SF-WRL-23319 | Brand: SparkFun
The Arduino GIGA R1 WiFi is a powerful development board built around the STM32H747XI dual-core microcontroller, featuring a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz. With 2 MB flash and 1 MB RAM, it handles de...
Delivered by Fri 14 Aug
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
SKU: SF-ROB-22132 | Brand: SparkFun
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...
Delivered by Fri 14 Aug
Useful Sensors Tiny Code Reader
SKU: SF-SEN-23352 | Brand: SparkFun
QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...
Delivered by Wed 5 Aug
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Wed 5 Aug
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Thu 27 Aug
Gravity: CH423 I2C 24 Digital IO Expansion Module
SKU: DF-DFR0979 | Brand: DFRobot
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...
Delivered by Wed 5 Aug
Adafruit PCA9546 4-Channel I2C Multiplexer
SKU: AF-5663 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...
Delivered by Thu 27 Aug
Adafruit PCF8575 I2C 16 GPIO Expander Breakout
SKU: AF-5611 | Brand: Adafruit
The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...
Delivered by Thu 27 Aug
ALFA Network WiFi HaLow HAT
SKU: SF-WRL-19956 | Brand: SparkFun
The ALFA Network AHPI7292S is the world's first WiFi HaLow (802.11ah) HAT for Raspberry Pi. Similar to LoRa, WiFi HaLow operates in the sub-gigahertz 915MHz band, providing long-range, low-power wireless communication...
Delivered by Fri 14 Aug
Gravity: O2 Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0465 | Brand: DFRobot
This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ox...
Delivered by Fri 14 Aug
Gravity: SO2 Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0470 | Brand: DFRobot
A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration ...
Delivered by Fri 14 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared