Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Wed 16 Sep
GY-68 BMP180 Digital Barometric Pressure Sensor Board Module
SKU: LB-LR0100 | Brand: Little Bird
Elevate your project with the GY-68 BMP180 Sensor Module, a compact and highly accurate digital barometric pressure sensor designed for precision measurements in various applications.Product Specifications: Item Name...
Delivered by Tue 8 Sep
Gravity: Factory Calibrated Correlated Color Temperature (CCT); ALS Meter for Professional Photography
SKU: DF-SEN0611 | Brand: DFRobot
The Gravity: Correlated Color Temperature (CCT) & ALS Meter is a high-performance light sensing device, specifically designed to meet the needs of professional videographers and photographers. With precise calibration...
Delivered by Thu 3 Sep
Gravity: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0617 | Brand: DFRobot
The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...
Delivered by Thu 3 Sep
SparkFun Thing Plus - NORA-W306
SKU: SF-WRL-21637 | Brand: SparkFun
The SparkFun Thing Plus - NORA-W306 is a Feather form-factor development board equipped with the u-blox NORA-W306 module. The module contains a Realtek RTL8720DF, which has an integrated single-chip low-power dual-ban...
Delivered by Thu 3 Sep
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
SKU: AF-5996 | Brand: Adafruit
The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs ...
Delivered by Wed 16 Sep
SparkFun Ultrasonic Distance Sensor - TCT40 (Qwiic)
SKU: SF-SEN-24805 | Brand: SparkFun
The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...
Delivered by Thu 3 Sep
Adafruit Feather RP2040 Adalogger - 8MB Flash with microSD Card
SKU: AF-5980 | Brand: Adafruit
The Feather RP2040 Adalogger combines the RP2040 dual-core processor with a MicroSD card holder for data logging and file storage. It features 8 MB SPI flash, 264 KB SRAM, USB Type C, STEMMA QT connector, and built-in...
Delivered by Wed 16 Sep
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
SKU: AF-5976 | Brand: Adafruit
The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...
Delivered by Wed 16 Sep
Adafruit TRRS Trinkey - USB Key for Assistive Technology
SKU: AF-5954 | Brand: Adafruit
The Adafruit TRRS Trinkey is a USB-A plug-in microcontroller designed specifically for assistive technology. It combines an ATSAMD21 processor with a switched TRRS 3.5mm audio jack, connecting all 6 jack pins (tip, ri...
Delivered by Wed 16 Sep
Adafruit PiCowbell Camera Breakout - 120 Degree Low Distortion
SKU: AF-5948 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout adds a 5-megapixel camera with a 120-degree low-distortion wide-angle lens to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's bui...
Delivered by Wed 16 Sep
Adafruit BNO055 + BMP280 BFF Add-On for QT Py
SKU: AF-5937 | Brand: Adafruit
The Adafruit BNO055 + BMP280 BFF is a compact add-on board that gives any QT Py or Xiao board powerful 9-degree-of-freedom (9-DoF) motion sensing plus barometric pressure and altitude measurement. It mounts directly o...
Delivered by Wed 16 Sep
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Delivered by Wed 16 Sep
Adafruit Terminal PiCowbell for Pico - Reset Button & STEMMA QT
SKU: AF-5904 | Brand: Adafruit
The Adafruit Terminal PiCowbell gives your Raspberry Pi Pico or Pico W quick, solderless access to every GPIO pin via screw terminal blocks. Simply connect 18–26 AWG solid or stranded core wires to any of the 40 termi...
Delivered by Wed 16 Sep
Adafruit Proto Under Plate PiCowBell for Pico
SKU: AF-5905 | Brand: Adafruit
The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket head...
Delivered by Wed 16 Sep
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi
SKU: SF-GPS-21305 | Brand: SparkFun
The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated...
Delivered by Thu 3 Sep
SparkFun Qwiic Buzzer
SKU: SF-BOB-24474 | Brand: SparkFun
The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting (or urgent) happens. Simply connect a Qwiic cable and load up some pre-written ...
Delivered by Thu 3 Sep
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
SKU: SF-SEN-22638 | Brand: SparkFun
The SparkFun Tristimulus Color Sensor is built around the Texas Instruments OPT4048DTSR — a high-speed, high-precision four-channel colour sensor. Three channels closely match the CIE 1931 tristimulus XYZ spectra with...
Delivered by Thu 3 Sep
Flexible Qwiic Cable - Female Jumper (4-pin, Heat Shrink)
SKU: SF-CAB-22726 | Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the ma...
Delivered by Thu 3 Sep
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
SKU: SF-GPS-22660 | Brand: SparkFun
The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology....
Delivered by Thu 3 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
