Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
SKU: AF-5976 | Brand: Adafruit
The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...
Delivered by Thu 27 Aug
Adafruit TRRS Trinkey - USB Key for Assistive Technology
SKU: AF-5954 | Brand: Adafruit
The Adafruit TRRS Trinkey is a USB-A plug-in microcontroller designed specifically for assistive technology. It combines an ATSAMD21 processor with a switched TRRS 3.5mm audio jack, connecting all 6 jack pins (tip, ri...
Delivered by Thu 27 Aug
Adafruit PiCowbell Camera Breakout - 120 Degree Low Distortion
SKU: AF-5948 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout adds a 5-megapixel camera with a 120-degree low-distortion wide-angle lens to your Raspberry Pi Pico or Pico W. Capture raw RGB images for analysis or use the OV5640's bui...
Delivered by Thu 27 Aug
Adafruit BNO055 + BMP280 BFF Add-On for QT Py
SKU: AF-5937 | Brand: Adafruit
The Adafruit BNO055 + BMP280 BFF is a compact add-on board that gives any QT Py or Xiao board powerful 9-degree-of-freedom (9-DoF) motion sensing plus barometric pressure and altitude measurement. It mounts directly o...
Delivered by Thu 27 Aug
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Delivered by Thu 27 Aug
Adafruit Terminal PiCowbell for Pico - Reset Button & STEMMA QT
SKU: AF-5904 | Brand: Adafruit
The Adafruit Terminal PiCowbell gives your Raspberry Pi Pico or Pico W quick, solderless access to every GPIO pin via screw terminal blocks. Simply connect 18–26 AWG solid or stranded core wires to any of the 40 termi...
Delivered by Thu 27 Aug
Adafruit Proto Under Plate PiCowBell for Pico
SKU: AF-5905 | Brand: Adafruit
The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket head...
Delivered by Thu 27 Aug
SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi
SKU: SF-GPS-21305 | Brand: SparkFun
The SparkFun GPS-RTK Dead Reckoning pHAT brings high-precision GNSS positioning with automotive dead reckoning to the Raspberry Pi. Built around the u-blox ZED-F9R module, it fuses GNSS measurements with an integrated...
Delivered by Fri 14 Aug
SparkFun Qwiic Buzzer
SKU: SF-BOB-24474 | Brand: SparkFun
The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting (or urgent) happens. Simply connect a Qwiic cable and load up some pre-written ...
Delivered by Fri 14 Aug
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
SKU: SF-SEN-22638 | Brand: SparkFun
The SparkFun Tristimulus Color Sensor is built around the Texas Instruments OPT4048DTSR — a high-speed, high-precision four-channel colour sensor. Three channels closely match the CIE 1931 tristimulus XYZ spectra with...
Delivered by Fri 14 Aug
Flexible Qwiic Cable - Female Jumper (4-pin, Heat Shrink)
SKU: SF-CAB-22726 | Brand: SparkFun
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the ma...
Delivered by Fri 14 Aug
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
SKU: SF-GPS-22660 | Brand: SparkFun
The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology....
Delivered by Fri 14 Aug
Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic
SKU: AF-5753 | Brand: Adafruit
Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw ...
Delivered by Thu 27 Aug
Arduino Portenta C33
SKU: SF-DEV-22692 | Brand: SparkFun
The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with o...
Delivered by Fri 14 Aug
Gravity: GR10-30 Gesture Sensor (UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0561 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward, backward, rotate clockwise and counterclockwise, rotate clockwise and counterclockwise continuously, hover, ...
Delivered by Fri 14 Aug
Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter
SKU: AF-5740 | Brand: Adafruit
This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button pre...
Delivered by Thu 27 Aug
Hackster & DFRobot EEDU Enviromental Sensor Kit (ESP32)
SKU: DF-TEM2022C-EN-1 | Brand: DFRobot
The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil mo...
Delivered by Fri 14 Aug
Hackster and DFRobot AI Starter EEDU Kit
SKU: DF-TEM2022A-EN-1 | Brand: DFRobot
We're excited to bring you three EEDU kits designed to make it easy for you to get started with AI, IoT, and environmental sensing using programming hardware. Each kit is built around an Arduino-compatible, ESP32-base...
Delivered by Fri 14 Aug
SparkFun GPS Breakout - Chip Antenna, SAM-M10Q (Qwiic)
SKU: SF-GPS-21834 | Brand: SparkFun
The SparkFun SAM-M10Q GPS Breakout features the SAM-M10Q chip-antenna module from u-blox©. The M10Q line is the successor to u-blox's M8Q found on the SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic), and is a dr...
Delivered by Fri 14 Aug
SparkFun Temperature Sensor - STTS22H (Qwiic)
SKU: SF-SEN-21262 | Brand: SparkFun
The SparkFun STTS22H is a Qwiic-enabled temperature sensor breakout based on ST Microelectronics' ultralow-power, high-accuracy digital temperature sensor. Factory calibrated to ±0.5°C accuracy without any application...
Delivered by Fri 14 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
