Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
SKU: SF-ROB-22132 | Brand: SparkFun
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...
Delivered by Fri 14 Aug
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Wed 5 Aug
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Thu 27 Aug
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Wed 19 Aug
Adafruit PCF8575 I2C 16 GPIO Expander Breakout
SKU: AF-5611 | Brand: Adafruit
The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...
Delivered by Thu 27 Aug
WAVEGO, 12-DOF Bionic Dog-Like Robot, Open Source for ESP32 And PI4B, Facial Recognition, Color Tracking, Motion Detection
SKU: WS-21743 | Brand: Waveshare
WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controlle...
Delivered by Thu 27 Aug
Waterproof SMD DS18B20 Digital Temperature Sensor
SKU: DF-SEN0511 | Brand: DFRobot
This waterproof DS18B20 digital temperature sensor delivers accurate readings over a simple 1-Wire interface, requiring just a single data pin on your microcontroller. The sealed probe and silicone lead wire make it i...
Delivered by Fri 14 Aug
NPN to PNP Signal Converter / Adapter Module
SKU: DF-FIT0850 | Brand: DFRobot
This NPN to PNP signal converter module bridges the gap when your sensor outputs an NPN signal but your controller or PLC expects a PNP input. Simply wire it inline between the sensor and the controller to convert the...
Delivered by Wed 5 Aug
4-Channel Level Converter (12V to 5V)
SKU: DF-DFR0914 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel fe...
Delivered by Fri 14 Aug
SparkFun Thing Plus - ESP32-S2 WROOM
SKU: SF-WRL-17743 | Brand: SparkFun
The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including t...
Delivered by Fri 14 Aug
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
SKU: AF-4886 | Brand: Adafruit
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...
Delivered by Thu 27 Aug
4 Channels IR Reflective Sensor
SKU: EC-SPS40201S | Brand: Elecrow
This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...
Delivered by Wed 5 Aug
micro:bit Edge Connector - PTH, Right Angle (80-pin)
SKU: SF-PRT-17252 | Brand: SparkFun
The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy...
Delivered by Wed 5 Aug
SparkFun Qwiic GPIO
SKU: SF-DEV-17047 | Brand: SparkFun
The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...
Delivered by Wed 5 Aug
Rotary Encoder - Illuminated (RGB)
SKU: SF-COM-15141 | Brand: SparkFun
Rotary encoders can be used similarly to potentiometers. The difference being that an encoder has full rotation without limits (It just goes round and round). They output gray code so that you can tell how much and in...
Delivered by Fri 14 Aug
SparkFun Motor Driver - Dual TB6612FNG (1A)
SKU: SF-ROB-14451 | Brand: SparkFun
The SparkFun TB6612FNG Motor Driver breakout can independently control up to two DC motors at a constant current of 1.2 A (3.2 A peak). Each motor channel supports four modes — clockwise, counter-clockwise, short-brak...
Delivered by Fri 14 Aug
Gravity:Digital Piranha LED Module - Green
SKU: DF-DFR0031-G | Brand: DFRobot
This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...
Delivered by Wed 5 Aug
RGB LED Breakout (5050)
SKU: DF-DFR0238 | Brand: DFRobot
This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...
Delivered by Wed 5 Aug
RaspRover 4WD AI Robot for Raspberry Pi 5 – Dual Controllers, Metal Body, Computer Vision
SKU: WS-26837 | Brand: Waveshare
The RaspRover is an open-source, four-wheel-drive AI robot platform powered by a dual-controller architecture. A Raspberry Pi 4B or 5 (not included) handles high-level AI processing and computer vision, while an onboa...
Delivered by Thu 27 Aug
RP2350 2.8" Capacitive Touch IPS Display – 240x320, 5-Point, SPI, Sensors
SKU: WS-30706 | Brand: Waveshare
Unleash your creativity and develop interactive applications with the RP2350 2.8inch Capacitive Touch Display Development Board. This cutting-edge board is packed with features that make it perfect for hobbyists, educ...
Delivered by Thu 27 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
