Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
L298N Dual H-Bridge Motor Driver Board
SKU: LB-OWL-HBRIDGE | Brand: Little Bird
Using the powerful L298N Dual Motor Driver，this module allows full control of two DC Motors or one stepper-motor. Screw Terminals for easy connections；LEDs show power and output status. Requires six digital inputs....
Delivered by Wed 5 Aug
ABS Protection Case for Raspberry Pi Zero Series, Fits Zero / Zero 2 W
SKU: WS-21354 | Brand: Waveshare
A protective ABS case designed for the Raspberry Pi Zero series, compatible with the Zero, Zero W, and Zero 2 W. The case features precise cutouts for all connectors and a reversed GPIO slot for easy access to the hea...
Delivered by Wed 5 Aug
Waterproof DS18B20 Digital Temperature Sensor For Arduino
SKU: DF-DFR0198 | Brand: DFRobot
This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...
Delivered by Fri 14 Aug
IO Expansion Board for Raspberry Pi Pico
SKU: DF-DFR0836 | Brand: DFRobot
Note: The product not inclueded Raspberry Pi Pico. This IO expansion board brings out all IO pins of the Raspberry Pi Pico onto male and female connectors. All pins are clearly labeled to allow beginners to quick...
Delivered by Wed 5 Aug
HRB8825 Stepper Motor HAT For Raspberry Pi
SKU: WS-22311 | Brand: Waveshare
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstep...
Delivered by Wed 5 Aug
Raspberry Pi 5 PoE HAT (G) – 5V 5A, 802.3af/at
SKU: WS-27670 | Brand: Waveshare
The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5 / CM 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is po...
Delivered by Thu 27 Aug
Pico - Dual-Expander IC Test Board
SKU: WS-19343 | Brand: Waveshare
A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...
Delivered by Wed 5 Aug
Pico - Quad-Expander IC Test Board
SKU: WS-19361 | Brand: Waveshare
Quad GPIO Expander for Raspberry Pi Pico, Four Sets of Male Headers, USB Power Connector Quad GPIO Expander For Pico Four Sets Of Standard Raspberry Pi Pico GPIO Male Headers, USB-Powered Support Features At ...
Delivered by Wed 5 Aug
Raspberry Pi 5 PCIe to M.2 NVMe SSD Adapter with PoE Function (B)
SKU: WS-29320 | Brand: Waveshare
A dual-function HAT for Raspberry Pi 5 that adds M.2 NVMe SSD support via the Pi's PCIe interface and delivers Power over Ethernet (PoE) — combining fast storage and single-cable power/networking into one board. Supp...
Delivered by Wed 5 Aug
SparkFun Load Cell Amplifier - HX711
SKU: SF-SEN-13879 | Brand: SparkFun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...
Delivered by Wed 5 Aug
Raspberry Pi GPIO Expansion Extension Board Screw Terminal Hat
SKU: LB-LS7233 | Brand: Little Bird
Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conve...
Delivered by Wed 5 Aug
Waterproof DS18B20 Temperature Probe 1M with XH2.54mm Connector
SKU: LB-LS4690 | Brand: Little Bird
Digital temperature sensor DS18B20, waterproof case. Working range from -55 to 125 degrees. Resolution 0.5 in range from -10 up to 85 degrees.
Delivered by Wed 5 Aug
Adafruit KB2040 - RP2040 Kee Boar Driver
SKU: AF-5302 | Brand: Adafruit
The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector...
Delivered by Wed 5 Aug
Terminal Block Board for Raspberry Pi Pico
SKU: DF-DFR0924 | Brand: DFRobot
A terminal block expansion board for the Raspberry Pi Pico, designed for makers who prefer screw-terminal connections over soldering or breadboard wiring. Every Pico pin is broken out to a labelled terminal block, pro...
Delivered by Fri 14 Aug
Tiny 2350
SKU: PI-PIM721 | Brand: Pimoroni
The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...
Delivered by Wed 5 Aug
Adafruit QT Py RP2040
SKU: AF-4900 | Brand: Adafruit
The Adafruit QT Py RP2040 puts the popular Raspberry Pi RP2040 chip into the tiny QT Py form factor. With dual-core ARM Cortex-M0+ running at 125 MHz, 264 KB SRAM, 8 MB flash, native USB, and a STEMMA QT connector, it...
Delivered by Wed 5 Aug
Temperature Sensor - Waterproof (DS18B20)
SKU: SF-SEN-11050 | Brand: SparkFun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...
Delivered by Wed 5 Aug
Arduino Nano ESP32 with headers
SKU: DF-DFR1096 | Brand: DFRobot
The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...
Delivered by Fri 14 Aug
SparkFun Logic Level Converter - Bi-Directional
SKU: SF-BOB-12009 | Brand: SparkFun
The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...
Delivered by Wed 5 Aug
Waterproof DS18B20 Sensor Kit
SKU: DF-KIT0021 | Brand: DFRobot
A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...
Delivered by Wed 5 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
