Brands and Manufacturers

SKU: AF-3424 | Brand: Adafruit

This chrome-plated rugged metal pushbutton features a built-in RGB LED ring light and a latching on/off mechanism. Press once to latch on, press again to release — unlike momentary buttons, it stays in position. Simpl...

SKU: AF-3591 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...

SKU: AF-3433 | Brand: Adafruit

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a ...

SKU: AF-1612 | Brand: Adafruit

The NeoPixel Mini PCBs are among the smallest addressable RGB LED breakouts available. Each tiny board measures just 8 × 10 mm and features two sets of three solder pads on the back for easy wiring. The pixels are cha...

SKU: AF-1655 | Brand: Adafruit

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive...

SKU: AF-1586 | Brand: Adafruit

Round and round they go! 24 ultra-bright smart RGB NeoPixels are arranged in a circle with a 66 mm (2.6″) outer diameter — the largest in the NeoPixel Ring family. Each LED is individually addressable from a single mi...

SKU: AF-1487 | Brand: Adafruit

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGB LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour. Arranged in an 8×8 matrix, each pixel is individually addressable w...

SKU: AF-2945 | Brand: Adafruit

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your F...

SKU: AF-285 | Brand: Adafruit

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G,...

SKU: AF-3179 | Brand: Adafruit

The Feather M0 RFM96 LoRa Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 433 MHz. LoRa modulation delivers signif...

SKU: AF-3176 | Brand: Adafruit

The Feather M0 RFM69HCW Packet Radio (868/915 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 868 or 915 MHz. The exact radio f...

SKU: AF-3191 | Brand: Adafruit

The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 1...

SKU: AF-3231 | Brand: Adafruit

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: AF-491 | Brand: Adafruit

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. It's similar in size to an arcade button (and will fit in holes drilled for 'standard' 30mm buttons) bu...

SKU: AF-2590 | Brand: Adafruit

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with th...

SKU: AF-2926 | Brand: Adafruit

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...

SKU: DF-DRI0001 | Brand: DFRobot

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for mot...

SKU: DF-DFR1120-915 | Brand: DFRobot

The LoRaWAN Control Terminal is a comprehensive Industrial IoT (IIoT) node that bridges field devices with remote cloud platforms. Operating on the US 915MHz band with up to 4km range, this DIN-rail mountable controll...

SKU: LB-LS6569 | Brand: Little Bird

A DIY soldering kit that builds into a functional ultrasonic distance meter. Using an HC-SR04 ultrasonic sensor, STC89C52 microcontroller, and 3-digit 7-segment display, this kit measures distances from 5cm to 4m with...