Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Octopus PIR Sensor Brick
SKU: EF-EF04055 | Brand: ElecFreaks
OCTOPUS PIR Sensor module is a type of electronic building block based on AM412 pyroelectric digital smart sensor. It can be used in sensing and detection of human or animal motion, sensing distance is about 4-5 me...
Delivered by Tue 25 Aug
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
SKU: AF-4170 | Brand: Adafruit
A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...
Delivered by Tue 25 Aug
Adafruit RGB Matrix Bonnet for Raspberry Pi
SKU: AF-3211 | Brand: Adafruit
The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, a...
Delivered by Wed 16 Sep
Adafruit Audio FX Sound Board - WAV/OGG Trigger - 16MB storage with 2x2W Amp
SKU: AF-2217 | Brand: Adafruit
The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire u...
Delivered by Wed 16 Sep
Adafruit GEMMA v2 - Miniature wearable electronic platform
SKU: AF-1222 | Brand: Adafruit
The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable eno...
Delivered by Tue 25 Aug
Adafruit RGB Matrix Shield for Arduino
SKU: AF-2601 | Brand: Adafruit
The Adafruit RGB Matrix Shield simplifies connecting HUB75-type RGB LED matrices to Arduino-compatible boards. Instead of wiring up a bundle of individual connections, this shield handles all the routing for you — jus...
Delivered by Tue 25 Aug
Adafruit LED Sequins - Pack of 5 - Royal Blue
SKU: AF-1757 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Tue 25 Aug
Adafruit PiTFT 2.2 HAT Mini Kit - 320x240 2.2 TFT - No Touch
SKU: AF-2315 | Brand: Adafruit
The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini cons...
Delivered by Tue 25 Aug
64x32 RGB LED Matrix - 5mm pitch
SKU: AF-2277 | Brand: Adafruit
The 64×32 RGB LED Matrix Panel with 5mm pitch features 2048 bright RGB LEDs in a 320×160mm panel. The wider pixel spacing makes this panel ideal for viewing from further away, producing clear images and text at distan...
Delivered by Tue 25 Aug
Hall effect sensor [US5881LUA]
SKU: AF-158 | Brand: Adafruit
Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one wou...
Delivered by Tue 25 Aug
4-channel I2C-safe Bi-directional Logic Level Converter [BSS138]
SKU: AF-757 | Brand: Adafruit
This bi-directional logic level converter from Adafruit uses 4× BSS138 FETs with 10K pull-up resistors to safely shift signals between different voltage levels. Unlike many level shifters, this design is fully compati...
Delivered by Wed 16 Sep
Circuit Playground Express [Developer Edition]
SKU: AF-3333 | Brand: Adafruit
The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four prog...
Delivered by Tue 25 Aug
Arcade Button with LED - 30mm Translucent Blue
SKU: AF-3490 | Brand: Adafruit
This 30mm translucent blue arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direc...
Delivered by Wed 16 Sep
Arcade Button with LED - 30mm Translucent Green
SKU: AF-3487 | Brand: Adafruit
This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or dire...
Delivered by Wed 16 Sep
Adafruit CAN Pal - CAN Bus Transciever
SKU: AF-5708 | Brand: Adafruit
The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...
Delivered by Tue 25 Aug
SparkFun Qwiic micro:bit Breakout (with Headers)
SKU: SF-BOB-16446 | Brand: SparkFun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...
Delivered by Thu 3 Sep
GPIO Female Socket Riser Header - 2x2 4-pin
SKU: AF-4855 | Brand: Adafruit
A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...
Delivered by Tue 25 Aug
Adafruit Feather M0 Adalogger
SKU: AF-2796 | Brand: Adafruit
The Feather M0 Adalogger is an all-in-one datalogger built around the ATSAMD21G18 ARM Cortex M0 processor, with a built-in MicroSD card holder, native USB, and LiPo battery charging. With 256KB of flash and 32KB of RA...
Delivered by Tue 25 Aug
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
SKU: AF-3190 | Brand: Adafruit
The Adafruit DRV8871 is a single-channel brushed DC motor driver breakout capable of delivering up to 3.6 A peak current with a wide 6.5–45V motor voltage range. Its resistor-set current limiting and built-in PWM supp...
Delivered by Wed 16 Sep
PIR (motion) sensor
SKU: AF-189 | Brand: Adafruit
PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
