Brands and Manufacturers

SKU: AF-5767 | Brand: Adafruit

The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing ove...

SKU: AF-5695 | Brand: Adafruit

The Adafruit NeoKey BFF adds a single mechanical key switch with RGB backlighting to any QT Py or Xiao board. Designed to solder or plug onto the back of your QT Py, it features a Kailh hot-swap socket for tool-free M...

SKU: AF-5673 | Brand: Adafruit

A high-quality 5 Megapixel camera breakout designed for hobby-level microcontrollers like the RP2040 and ESP32-S series. The OV5640 sensor with a 120-degree wide-angle lens connects via an 8-bit parallel data interfac...

SKU: AF-5679 | Brand: Adafruit

The Adafruit Floppy FeatherWing lets you read and write 3.5-inch or 5.25-inch floppy disks using a Feather microcontroller. It connects to standard 34-pin IDC floppy drives and includes built-in level shifting between...

SKU: AF-5491 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-5435 | Brand: Adafruit

A miniature traffic light standing 6.5 cm tall, featuring red, yellow, and green LEDs. Perfect for dioramas, model sets, dollhouses, and electronics learning projects. The LEDs are common anode — connect 3–6V to the b...

SKU: DF-SEN0481 | Brand: DFRobot

This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped but there is a small gap between them. When a sui...

SKU: AF-5129 | Brand: Adafruit

Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you ca...

SKU: AF-5066 | Brand: Adafruit

Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter featuring a fully clear plastic body. This sensor sits in line with your water line and uses a pinwhee...

SKU: AF-4060 | Brand: Adafruit

The thirst is real! Keep your flora (plants, not the board *wink*) happy and hydrated with the Circuit Playground Express Soil Sensor Mini Kit. This kit will teach you all about how to keep your plants in good co...

SKU: AF-3573 | Brand: Adafruit

The Adafruit TPL5111 Low Power Timer Breakout turns any electronics project into a low-power system by periodically toggling an enable pin. Connect it to your project's enable line, and the TPL5111 will handle the res...

SKU: AF-3574 | Brand: Adafruit

The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...

SKU: AF-3397 | Brand: Adafruit

The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together:...

SKU: SF-BOB-16445 | Brand: SparkFun

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C ...

SKU: DF-DFR0119-O | Brand: DFRobot

This compact stereo amplifier module from DFRobot features a 2.54mm pin pitch for easy breadboard and embedded use. It delivers 3W per channel with left and right stereo output, and includes a shutdown (SHDN) pin for ...

SKU: AF-4892 | Brand: Adafruit

These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and ca...

SKU: AF-4860 | Brand: Adafruit

The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop...

SKU: DF-DFR0722 | Brand: DFRobot

The 8421 Encoder (Horizontal) is an absolute position encoder with 16 positions (0–F) using BCD/8421 encoding. Unlike incremental encoders or potentiometers, the mechanical position directly determines the output code...

SKU: DF-DFR0721 | Brand: DFRobot

The 8421 Encoder (Vertical) is an absolute position encoder with 16 positions (0–F) using BCD/8421 encoding. Unlike incremental encoders or potentiometers, the mechanical position directly determines the output code —...

SKU: AF-4374 | Brand: Adafruit

The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sen...