Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Mini MOSFET Slide Switch with Reverse Voltage Protection, SV
SKU: PL-2811 | Brand: Pololu
The Mini MOSFET Slide Switch is a compact, breadboard-compatible power switch module that uses a pair of P-channel MOSFETs to deliver continuous currents up to 4.3 A at 4.5–32 V. It features built-in reverse-voltage p...
Out of stock
ACS711EX Current Sensor Carrier -31A to +31A
SKU: PL-2453 | Brand: Pololu
A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...
Out of stock
Pololu RC Switch with Small Low-Side MOSFET
SKU: PL-2802 | Brand: Pololu
The Pololu RC Switch with Small Low-Side MOSFET converts standard hobby RC receiver outputs into simple on/off signals. It measures incoming RC pulse widths against a configurable threshold to control an integrated MO...
Out of stock
Pololu Carrier with Sharp GP2Y0D815Z0F Digital Distance Sensor 15cm
SKU: PL-2465 | Brand: Pololu
This small digital distance sensor detects objects between 0.5 cm and 15 cm (0.2″ and 6″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is ...
Out of stock
Pololu 38 kHz IR Proximity Sensor, Fixed Gain, Low Brightness (irs05a)
SKU: PL-2461 | Brand: Pololu
Discontinuation notice: These original (irs05a) versions of our 38 kHz IR proximity sensors have been replaced by newer (irs05b) high-brightness and low-brightness versions. The main changes are the locations o...
Out of stock
LattePanda Mu - A Micro x86 Compute Module (N305 CPU, 16GB RAM, 64GB eMMC)
SKU: DF-DFR1149 | Brand: DFRobot
Introduction LattePanda Mu is a micro x86 compute module featuring an Intel N305 octa-core processor, 16GB LPDDR5 memory, and 64GB storage. It offers extensive connectivity, including 3 HDMI/DisplayPort, 8 USB 2.0, u...
Out of stock
Ring Inductive Proximity Sensor (30mm Hole Diameter)
SKU: DF-FIT0764 | Brand: DFRobot
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...
Out of stock
Ring Inductive Proximity Sensor (12mm Hole Diameter)
SKU: DF-FIT0761 | Brand: DFRobot
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...
Out of stock
Spartan Arduino PLC 16DA (Optoisolated Output)
SKU: DF-DFR0902 | Brand: DFRobot
The Spartan Arduino PLC 16DA is an Arduino Leonardo-based industrial programmable logic controller with optoisolated outputs. It features 8 inputs (digital and analogue) and 8 optoisolated outputs (analogue, digital, ...
Out of stock
Ring Inductive Proximity Sensor (22mm Hole Diameter)
SKU: DF-FIT0763 | Brand: DFRobot
This inductive ring proximity sensor detects metal objects as they enter or pass through a 22 mm ring opening. Operating on a 6–36 V supply with NPN normally-open output, it delivers a sub-1 ms response time — fast en...
Out of stock
Ring Inductive Proximity Sensor (10mm Hole Diameter)
SKU: DF-FIT0760 | Brand: DFRobot
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...
Out of stock
Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
SKU: PL-4760 | Brand: Pololu
This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not...
Out of stock
Grove Shield FeatherWing for Particle Mesh and all Feathers
SKU: AF-4309 | Brand: Adafruit
The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have ...
Out of stock
Addressable Through-Hole 8mm RGB LED with Diffused Lens, WS2811 Driver (10-Pack)
SKU: PL-2536 | Brand: Pololu
A pack of 10 addressable RGB LEDs in a larger 8 mm through-hole form factor with diffused lenses. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just ...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
