Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Piezo Vibration Sensor - Small Vertical
SKU: SF-SEN-09199 | Brand: SparkFun
The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user....
Delivered by Thu 2 Jul
Pololu Carrier for MQ Gas Sensors (Bare PCB Only)
SKU: PL-1479 | Brand: Pololu
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the boar...
Delivered by Tue 23 Jun
Adafruit ALS-PT19 Analog Light Sensor Breakout
SKU: AF-2748 | Brand: Adafruit
The Adafruit ALS-PT19 is a compact analog light sensor that provides a simple voltage output proportional to ambient light intensity. Its spectral response closely matches that of the human eye, thanks to a high infra...
Delivered by Tue 23 Jun
Thermistor 10K
SKU: SF-SEN-00250 | Brand: SparkFun
10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...
Delivered by Tue 23 Jun
Thermocouple Type-K Glass Braid Insulated [K]
SKU: AF-270 | Brand: Adafruit
A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface te...
Delivered by Tue 23 Jun
Arduino DTMF Shield
SKU: DF-DFR0308 | Brand: DFRobot
The Arduino DTMF Shield is a dual-tone multi-frequency decoder module that lets your Arduino interpret touch-tone signals from phones. Connect it to a GSM/GPRS shield and you can send commands to your Arduino via phon...
Delivered by Thu 2 Jul
Adafruit Metro Mini 328 - 5V 16MHz
SKU: AF-2590 | Brand: Adafruit
The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with th...
Delivered by Tue 23 Jun
SparkFun Music Instrument Shield
SKU: SF-DEV-10587 | Brand: SparkFun
Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The SparkFun Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next A...
Delivered by Tue 23 Jun
Wired Miniature Electret Microphone
SKU: AF-1935 | Brand: Adafruit
That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...
Delivered by Tue 23 Jun
Adafruit METRO M0 Express - designed for CircuitPython [ATSAMD21G18]
SKU: AF-3505 | Brand: Adafruit
The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a ma...
Delivered by Mon 13 Jul
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Tue 23 Jun
LoRaWAN Control Terminal (US 915MHz, 4km Range, RS485)
SKU: DF-DFR1120-915 | Brand: DFRobot
The LoRaWAN Control Terminal is a comprehensive Industrial IoT (IIoT) node that bridges field devices with remote cloud platforms. Operating on the US 915MHz band with up to 4km range, this DIN-rail mountable controll...
Delivered by Tue 23 Jun
Potentiometer - Thumbwheel Type, 25kΩ - SparkFun Electronics
SKU: SF-COM-28384 | Brand: SparkFun
A compact thumbwheel potentiometer for adding analog control to your projects. The ergonomic wheel design allows for easy adjustment with one finger, making it perfect for volume controls, parameter adjustment, and us...
Delivered by Thu 2 Jul
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
SKU: DF-DFR1132 | Brand: DFRobot
##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction streng...
Delivered by Thu 2 Jul
Mono Enclosed Speaker - 1W 8 Ohm
SKU: AF-5986 | Brand: Adafruit
This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a pr...
Delivered by Tue 23 Jun
Line Follower Sensor
SKU: SF-SEN-24048 | Brand: SparkFun
A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared ligh...
Delivered by Thu 2 Jul
Inventor HAT Mini
SKU: PR-PIM672 | Brand: Little Bird
Introducing the Inventor HAT Mini, a versatile motor, servo, and audio driver add-on board designed for Raspberry Pi enthusiasts. With this compact HAT, you can bring your mechanical inventions, creations, and cont...
Delivered by Tue 23 Jun
SparkFun Qwiic Pocket Development Board - ESP32-C6
SKU: SF-DEV-22925 | Brand: SparkFun
The SparkFun ESP32-C6 Qwiic Pocket Development Board is designed to fit the 1in. x 1in. Qwiic Standard Size, making it easy to add a powerful wireless development platform that stacks into any existing project using t...
Delivered by Tue 23 Jun
Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Display
SKU: AF-5727 | Brand: Adafruit
The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnecte...
Delivered by Tue 23 Jun
Pimoroni Inventor HAT Mini for Raspberry Pi
SKU: AF-5736 | Brand: Adafruit
A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life! Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, pro...
Delivered by Mon 13 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
