Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Circuit Playground Express Soil Sensor Mini Kit
SKU: AF-4060 | Brand: Adafruit
The thirst is real! Keep your flora (plants, not the board *wink*) happy and hydrated with the Circuit Playground Express Soil Sensor Mini Kit. This kit will teach you all about how to keep your plants in good co...
Delivered by Wed 8 Jul
Adafruit Feather nRF52 Pro with myNewt Bootloader
SKU: AF-3574 | Brand: Adafruit
The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...
Delivered by Wed 8 Jul
SparkFun Qwiic micro:bit Breakout
SKU: SF-BOB-16445 | Brand: SparkFun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C ...
Delivered by Mon 29 Jun
SparkFun MicroMod ESP32 Processor
SKU: SF-WRL-16781 | Brand: SparkFun
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...
Delivered by Thu 18 Jun
Hydrogen Sulfide Gas Sensor - MQ-136
SKU: SF-SEN-17052 | Brand: SparkFun
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...
Delivered by Mon 29 Jun
Homefixer ESP8266 devboard
SKU: EC-DTE00413H | Brand: Elecrow
Another development board for ESP8266-12F. But this one is a bit different, made to be easy to set up without the need for additional hardware like programmers and voltage regulators. A wide voltage range switching re...
Delivered by Thu 2 Jul
Octopus LM35 Analog Temperature Brick
SKU: EF-EF04070 | Brand: ElecFreaks
The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...
Delivered by Mon 29 Jun
Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235
SKU: AF-4686 | Brand: Adafruit
The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...
Delivered by Wed 8 Jul
Adafruit PCF8591 Quad 8-bit ADC + 8-bit DAC - STEMMA QT / Qwiic
SKU: AF-4648 | Brand: Adafruit
The Adafruit PCF8591 Quad 8-bit ADC + 8-bit DAC combines four analogue input channels and one analogue output channel in a single I2C breakout. Measure voltages from potentiometers, sensors, or other analogue sources ...
Delivered by Wed 8 Jul
Strain Gauge Load Cell - 4 Wires - 10Kg
SKU: AF-4542 | Brand: Adafruit
A 10 kg strain gauge load cell for measuring force, weight, and tension. The strain gauge is epoxy-bonded to a robust aluminium bar that protects the delicate foil element and constrains deflection to a safe range. As...
Delivered by Wed 8 Jul
Octopus Flame Sensor
SKU: EF-EF04003 | Brand: ElecFreaks
The Octopus Flame Sensor is a simple infrared-based module that detects the presence of a flame or fire source. Part of the Octopus Electronic Bricks system, it connects directly to Arduino and compatible boards with ...
Delivered by Mon 29 Jun
Octopus Touch PAD Sensor
SKU: EF-EF04011 | Brand: ElecFreaks
The Octopus Touch PAD Sensor is a capacitive touch module based on the TTP223-BA6 IC. It detects touch through dielectric materials such as glass, ceramic, and plastic, making it suitable for touch-through-panel appli...
Delivered by Mon 29 Jun
Octopus Rotary Encoder Brick OBEncoder
SKU: EF-EF04038 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...
Delivered by Mon 29 Jun
Octopus Analog Photocell Brick OBPhotocell
SKU: EF-EF04032 | Brand: ElecFreaks
The Octopus Analog Photocell Brick is a light-dependent resistor (LDR) module from the ElecFreaks Octopus Electronic Bricks series. It uses a cadmium-sulfide (CdS) photocell that changes resistance based on ambient li...
Delivered by Mon 29 Jun
Gravity: URM09 Analog Ultrasonic Sensor
SKU: DF-SEN0307 | Brand: DFRobot
The DFRobot URM09 is an analog output ultrasonic distance sensor optimised for fast ranging and obstacle avoidance. With a maximum measurement rate of 30Hz, built-in temperature compensation, and a range of 2–500cm, i...
Delivered by Mon 29 Jun
Panel Mount 1/8 / 3.5mm Mono Connector
SKU: AF-4361 | Brand: Adafruit
Pipe audio in or out of your project with this very handy panel mount audio jack. It's a mono jack with a disconnect pin so you'll get a ground sleeve pin, a left tip pin and a pin that will be disconnected when a jac...
Delivered by Wed 8 Jul
RP-C7.6-LT Thin Film Pressure Sensor
SKU: DF-SEN0298 | Brand: DFRobot
This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and ...
Delivered by Mon 29 Jun
RP-L-400 Thin Film Pressure Sensor
SKU: DF-SEN0299 | Brand: DFRobot
The RP-L-400 is a long, flexible thin-film pressure sensor with a 400 mm active length. It detects both static and dynamic pressure by converting applied force into a variable resistance — resistance decreases as pres...
Delivered by Mon 29 Jun
TS01 Non-contact IR Temperature Sensor 0-3V
SKU: DF-SEN0256 | Brand: DFRobot
The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...
Delivered by Mon 29 Jun
TS01 Non-contact IR Temperature Sensor 4-20mA
SKU: DF-SEN0264 | Brand: DFRobot
DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...
Delivered by Mon 29 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
