Brands and Manufacturers

SKU: DF-DFR0067 | Brand: DFRobot

This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memo...

SKU: WS-30535 | Brand: Waveshare

A PCIe adapter board for the Raspberry Pi 5 that supports up to four M.2 NVMe SSDs simultaneously. Connect via the Pi 5's PCIe interface using the included 16-pin cable and gain dramatically faster storage for NAS bui...

SKU: DF-DFR0997 | Brand: DFRobot

A 2.0-inch IPS colour display with 320 × 240 resolution and 16-bit colour depth (RGB565), supporting both I2C and UART communication via the Gravity connector. Powered by an ESP32-S3 chip with integrated LVGL graphics...

SKU: DF-DFR1173 | Brand: DFRobot

This compact voice prompt module integrates an intelligent MP3 playback chip with a 1 W speaker in a tiny 30 × 11 mm package. It supports MP3, WAV, and WMA hardware decoding with 16 MB of on-board storage that retains...

SKU: AF-5626 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9548 8-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to eight same-address I2C devices with completely solderless wiring. Nine JST S...

SKU: AF-5636 | Brand: Adafruit

The Adafruit SPI FLASH Breakout features a W25Q64 chip providing 64 Mbit (8 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontrol...

SKU: SF-SEN-22857 | Brand: SparkFun

Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's where the SparkFun VR IMU Breakout comes in. At its heart is CEVA’s BNO086, a combi...

SKU: DF-DFR0996 | Brand: DFRobot

A Magnetic latching relay is a new type of relay.  It features low power dissipation and noiseless.  Unlike other non-latching relay, the latching relay needs two digital pulse signal to switch ON/OFF state....

SKU: AF-5665 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membr...

SKU: AF-4538 | Brand: Adafruit

The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibra...

SKU: DF-SEN0463 | Brand: DFRobot

This Gravity Geiger Counter Module detects ionising radiation — including nuclear radiation, X-rays, and cosmic rays — using a large M4011 Geiger-Müller tube. When ionising particles pass through the tube, the module ...

SKU: AF-4517 | Brand: Adafruit

The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drif...

SKU: AF-5181 | Brand: Adafruit

The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven A...

SKU: AF-5027 | Brand: Adafruit

The Adafruit MCP9808 is a high-accuracy digital temperature sensor with ±0.25°C typical accuracy over its −40°C to +125°C range and 0.0625°C resolution. It communicates over standard I2C and runs on 2.7V to 5.5V power...

SKU: AF-4570 | Brand: Adafruit

The Adafruit DS1841 is an I2C-controlled logarithmic digital potentiometer from Maxim with a resistance range of 3.7 kΩ to 22 kΩ across 128 tap points. Unlike linear potentiometers, the DS1841's logarithmic response c...

SKU: AF-3967 | Brand: Adafruit

The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, ...

SKU: AF-5309 | Brand: Adafruit

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...

SKU: DF-SEN0497 | Brand: DFRobot

The DHT20 temperature & humidity sensor is the newly upgraded version of the DHT11. Data accuracy, stability, response speed, measurement range are greatly improved up. DHT20 is a brand new ASIC dedicated chip, an imp...

SKU: AF-4899 | Brand: Adafruit

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512...

SKU: DF-DFR0745 | Brand: DFRobot

Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. Y...