Brands and Manufacturers

SKU: LB-00158 | Brand: Little Bird

This PIR sensor is suitable for use with Arduino and Raspberry PI. The 3.3v logic level is very handy as it allows you to use this sensor with 3.3v Arduinos like the Due or Pro Mini as well as 5V like the Uno as 3....

SKU: LB-LR0230 | Brand: Little Bird

The HC-SR04 is a widely used ultrasonic distance sensor that measures distances from 2cm to 500cm (approximately 5 metres) with 1cm resolution. It works by emitting a 40kHz ultrasonic pulse, then measuring the time it...

SKU: LB-OWL-HBRIDGE | Brand: Little Bird

Using the powerful L298N Dual Motor Driver，this module allows full control of two DC Motors or one stepper-motor. Screw Terminals for easy connections；LEDs show power and output status. Requires six digital inputs....

SKU: LB-LR0109 | Brand: Little Bird

Add Bluetooth functionality to your project with the HC-05 Bluetooth Module. The module is found on a breakout board which provides breadboard-friendly headers for power, ground, TX, RX and enable pins. The breakou...

SKU: EC-RPI08239D | Brand: Elecrow

This SSD expansion board is specifically designed for the Raspberry Pi 5, featuring PCIe and M.2 M-key interfaces that enable the use of high-speed M.2 NVMe solid-state drives. This setup enhances storage performance ...

SKU: WS-19343 | Brand: Waveshare

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...

SKU: LB-LR0062 | Brand: Little Bird

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of...

SKU: WS-19361 | Brand: Waveshare

Quad GPIO Expander for Raspberry Pi Pico, Four Sets of Male Headers, USB Power Connector Quad GPIO Expander For Pico Four Sets Of Standard Raspberry Pi Pico GPIO Male Headers, USB-Powered Support Features At ...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: SF-SEN-10988 | Brand: SparkFun

This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to t...

SKU: LB-LR0029 | Brand: Little Bird

DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use.  This  DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption...

SKU: SF-SEN-13879 | Brand: SparkFun

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...

SKU: LB-OWL-IR | Brand: Little Bird

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to bu...

SKU: LB-LS0869 | Brand: Little Bird

The AM312 sensor is a mini IR pyroelectric infrared PIR motion human body sensor that is easy to install and has low power consumption. Its digital signal processing and high sensitivity make it ideal for use in au...

SKU: LB-LS2299 | Brand: Little Bird

A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...

SKU: AF-4682 | Brand: Adafruit

The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...

SKU: LB-LR0307 | Brand: Little Bird

Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...

SKU: LB-LS6503 | Brand: Little Bird

The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this com...

SKU: LB-LS7233 | Brand: Little Bird

Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conve...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...