Brands and Manufacturers

SKU: SF-COM-23979 | Brand: SparkFun

Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...

SKU: WS-25269 | Brand: Waveshare

This 7" IPS capacitive touchscreen from Waveshare connects to the Raspberry Pi via the DSI interface for a driver-free, plug-and-play experience. Featuring 800×480 resolution, 5-point multi-touch on toughened glass, a...

SKU: WS-26077 | Brand: Waveshare

TTL UART to CAN Mini ModuleUnlock seamless communication between TTL and CAN protocols with our cutting-edge TTL UART to CAN Mini Module. This miniature powerhouse is your gateway to bi-directional transmitting and re...

SKU: PR-PIM688 | Brand: Little Bird

A high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices. The Do-Everything Board 🦾 Yukon is a standalone controller that can...

SKU: PR-PIM672 | Brand: Little Bird

Introducing the Inventor HAT Mini, a versatile motor, servo, and audio driver add-on board designed for Raspberry Pi enthusiasts. With this compact HAT, you can bring your mechanical inventions, creations, and cont...

SKU: LB-LS5630 | Brand: Little Bird

A pair of 46mm propellers designed for 612 coreless motors. The optimised blade profile provides efficient thrust for mini drones and RC aircraft. Key Features 46mm Diameter – Sized for micro drones and RC aircraft...

SKU: SF-SEN-22494 | Brand: SparkFun

The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...

SKU: SF-DEV-22925 | Brand: SparkFun

The SparkFun ESP32-C6 Qwiic Pocket Development Board is designed to fit the 1in. x 1in. Qwiic Standard Size, making it easy to add a powerful wireless development platform that stacks into any existing project using t...

SKU: DF-EDU0170 | Brand: DFRobot

The Gravity Science Data Acquisition Module Kit is a comprehensive toolkit for conducting digital scientific experiments without programming or electronics knowledge. Built around the DFRobot SCI DAQ module, it includ...

SKU: AF-5783 | Brand: Adafruit

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...

SKU: AF-5700 | Brand: Adafruit

The Adafruit QT Py ESP32-S3 with 2 MB PSRAM is the memory-upgraded version of the QT Py ESP32-S3. With 4 MB flash, 512 KB SRAM, and 2 MB PSRAM, it can handle large data buffers — perfect for image processing, large JS...

SKU: SF-CAB-22034 | Brand: SparkFun

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA co...

SKU: AF-5727 | Brand: Adafruit

The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnecte...

SKU: PH-105480 | Brand: PiHut

Mount your Raspberry Pi camera case to a wall or ceiling with this adjustable bracket. The tilt and swivel mechanism lets you position your camera at just the right angle, then lock it in place with thumbscrews — idea...

SKU: SF-DEV-21251 | Brand: SparkFun

The Arduino Nano BLE Sense Rev2 packs the nRF52840 processor (32-bit ARM Cortex-M4 at 64 MHz) into the compact Nano form factor, with 1MB flash and 256KB SRAM. It includes Bluetooth 5.0, an impressive array of onboard...

SKU: AF-5637 | Brand: Adafruit

The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecti...

SKU: AF-5649 | Brand: Adafruit

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit...

SKU: PL-5049 | Brand: Pololu

The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are ...

SKU: KI-5681 | Brand: Kitronik

Explore time, light, and also sound with the Kitronik Alarm Clock Kit, a fun and hands-on introduction to the ZIP Halo HD. KITRONIK ALARM CLOCK KIT: The Kitronik Alarm Clock Kit with ZIP Halo HD for microbit provides ...

SKU: AF-5646 | Brand: Adafruit

Add a dazzling 5×5 grid of 25 addressable RGB NeoPixels to any QT Py or Xiao board with this compact BFF (Best Friend Forever) add-on. The tiny SK6805 LEDs (1.5 × 1.5 mm each) pack vivid colour into a minimal footprin...