Brands and Manufacturers

SKU: PL-837 | Brand: Pololu

The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tune...

SKU: SF-PRT-10371 | Brand: SparkFun

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: TB-ZL3348 | Brand: Little Bird

The LM348 is a quad operational amplifier IC containing four independent 741-type op-amps in a single 14-pin DIP package. It's a versatile, general-purpose op-amp suitable for a wide range of analogue circuit applicat...

SKU: DF-DFR0419 | Brand: DFRobot

You are viewing a 4GB RAM LattePanda with 64GB internal memory. It does not include a Windows 10 activation key. A LattePanda is a complete Windows 10 single board computer. It has everything a regular PC has a...

SKU: SF-COM-10001 | Brand: SparkFun

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong frict...

SKU: PL-159 | Brand: Pololu

These diagonal cutters come in handy whether you’re cutting wires or trimming plastic parts off of parts trees. They are made of forged steel, have a return spring and cushion grip, and are 4.5″ long.

SKU: SF-SEN-09836 | Brand: SparkFun

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...

SKU: DF-DRI0001 | Brand: DFRobot

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for mot...

SKU: DF-ROB0005 | Brand: DFRobot

The Turtle is a compact 2WD mobile robot platform designed for use with Arduino and other microcontroller boards. It comes as a kit with two geared DC motors, rubber wheels, a rear caster ball, an aluminium alloy chas...

SKU: SF-DEV-09709 | Brand: SparkFun

A compact prototyping shield designed specifically for the Arduino Pro Mini. When your project needs just a bit more space for external circuitry, this shield adds 38 unconnected plated through-holes (PTHs) in a form ...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...

SKU: AF-1949 | Brand: Adafruit

These Female/Female Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainb...

SKU: AF-825 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...

SKU: SF-COM-09594 | Brand: SparkFun

A standard 5 mm yellow LED — the essential building block for power indicators, status lights, sensor circuits, and blinking displays. Specifications Colour – Yellow Size – 5 mm (T-1 3/4) Forward Voltage – 2.0V t...

SKU: SF-COM-09592 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and ...

SKU: SF-SEN-09570 | Brand: SparkFun

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...

SKU: AF-2018 | Brand: Adafruit

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x8 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to...

SKU: AF-2077 | Brand: Adafruit

The Adafruit Proto Shield for Arduino (R3) is a versatile prototyping shield with a 0.1" grid, power rails, indicator LEDs, and stacking headers — everything you need to build custom circuits on top of your Arduino. V...