Brands and Manufacturers

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: DF-FIT0003 | Brand: DFRobot

This wheel is used in our most popular A4WD Mobile Platform and 2WD Arduino Mobile Robot Platform. Mounted directly on micro gear motors. Sold in pair. SPECIFICATIONS Outer Diameter: 65mm(2.6''...

SKU: DF-DFR0130-B | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: DF-DFR0021-G | Brand: DFRobot

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...

SKU: DF-DFR0021-B | Brand: DFRobot

This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...

SKU: DF-FIT0141 | Brand: DFRobot

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...

SKU: DF-FIT0160 | Brand: DFRobot

This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This v...

SKU: DF-FIT0146 | Brand: DFRobot

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at st...

SKU: SF-PRT-14417 | Brand: SparkFun

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...

SKU: AF-2651 | Brand: Adafruit

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...

SKU: SF-PRT-14299 | Brand: SparkFun

This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly...

SKU: AF-2716 | Brand: Adafruit

The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency ...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: SF-CAB-14276 | Brand: SparkFun

USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limited hosting capabilities! USB OTG is common for things like tablet c...

SKU: SF-COM-09276 | Brand: SparkFun

This heavy-duty SPST toggle switch provides simple on/off control for power circuits and panel-mounted applications. Rated for 2 A at 250 V AC or 4 A at 125 V AC, it's suitable for both mains-voltage and low-voltage p...

SKU: SF-SEN-09269 | Brand: SparkFun

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...

SKU: SF-COM-09264 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicato...

SKU: TB-HP9554 | Brand: Little Bird

A versatile prototyping board with a doughnut-pad layout for building electronic circuits. Each pad is separated from its neighbours by approximately 0.5 mm, providing electrical isolation while making it easy to brid...

SKU: SF-TOL-09146 | Brand: SparkFun

This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.

SKU: PL-1479 | Brand: Pololu

This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the boar...