Brands and Manufacturers

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: AF-3367 | Brand: Adafruit

The Mini USB Microphone is an ultra-compact plug-and-play USB microphone that requires no drivers. Simply plug it into any USB port and start recording immediately. Compatible with Raspberry Pi, laptops, desktops, an...

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: DF-FIT0980 | Brand: DFRobot

Keep your Raspberry Pi 5 running cool with this aluminium alloy cooling fan. Designed for the Pi 5's dedicated fan interface, it plugs in directly via a 4-pin JST connector — no complicated setup required. Self-locki...

SKU: LB-1601104 | Brand: Little Bird

USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headp...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: DF-FIT0701 | Brand: DFRobot

This product is a driver-free camera with 30W pixels and 640*480 resolution. The camera is well compatible with both Raspberry Pi and NVIDIA series mainboards. Just plug it in, and you’re good to go!The compact size o...

SKU: AF-4669 | Brand: Adafruit

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port. Use this capture device to convert a video signal from a camera (or another dev...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: EF-EF08209 | Brand: ElecFreaks

Documents Smart Cutebot kit

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: SF-DEV-11791 | Brand: SparkFun

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-5046 | Brand: Adafruit

The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: DF-FIT0860 | Brand: DFRobot

This small portable USB isolator with USB2.0 compatibility provides complete isolation between devices.  Featuring a 12Mbps data transmission rate and 2500V isolation voltage, the industrial USB isolator can ...

SKU: AF-4853 | Brand: Adafruit

This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you ...

SKU: DF-FIT0641 | Brand: DFRobot

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson...