Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
SKU: AF-1858 | Brand: Adafruit
This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...
Delivered by Tue 13 Oct
SparkFun LiPo Charger Basic - Micro-USB
SKU: SF-PRT-10217 | Brand: SparkFun
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells ...
Delivered by Tue 13 Oct
SparkFun Transceiver Breakout - RS-485
SKU: SF-BOB-10124 | Brand: SparkFun
This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can re...
Delivered by Tue 13 Oct
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Tue 13 Oct
Gravity: Starter Kit for Arduino
SKU: DF-KIT0111 | Brand: DFRobot
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible w...
Delivered by Tue 13 Oct
High Speed HDMI Cable (3 Feet)
SKU: DF-FIT0480 | Brand: DFRobot
INTRODUCTION This High Speed HDMI Cable provides a one-cable solution for your home entertainment needs. As a versatile HDMI cable, it provides high-definition quality for not only LattePand...
Delivered by Tue 13 Oct
SparkFun RedBot Buzzer
SKU: SF-ROB-12567 | Brand: SparkFun
This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when something interesting (or terrible) happens. The buzzer works by making use of two I/O pi...
Delivered by Tue 13 Oct
JST Jumper 3 Wire Assembly
SKU: SF-PRT-09915 | Brand: SparkFun
This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector ...
Delivered by Tue 13 Oct
LED - Basic Red 5mm (25 pack)
SKU: SF-COM-09856 | Brand: SparkFun
A pack of 25 standard red 5 mm through-hole LEDs. Supplied in a reusable ESD-safe bag. Specifications Colour – Red Size – 5 mm through-hole Forward Voltage – ~1.8–2.2 V Forward Current – 20 mA Package Contents...
Delivered by Tue 13 Oct
Fuse Clip 5mm
SKU: SF-COM-09773 | Brand: SparkFun
This is a 5mm PTH fuse clip intended to be used with our Glass Fuses. Note: These are sold in single units. If you intend to secure a fuse using these clips you’ll need two clips. We recommend ordering two. Part #: ...
Delivered by Tue 13 Oct
Green 7-segment clock display - 0.56 digit height
SKU: AF-813 | Brand: Adafruit
Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...
Delivered by Tue 13 Oct
WT8266-S1 WiFi Module Based on ESP8266
SKU: DF-TEL0109 | Brand: DFRobot
WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building aut...
Delivered by Tue 13 Oct
Gravity:Digital White LED Light Module
SKU: DF-DFR0021-W | Brand: DFRobot
A simple digital white LED module with Gravity interface. Plugs directly into DFRobot IO/Sensor expansion shields for easy integration with Arduino projects — ideal for beginners learning digital output control. Spec...
Delivered by Tue 13 Oct
Gravity: Arduino Infrared Motion Sensor
SKU: DF-SEN0018 | Brand: DFRobot
This is a simple to use arduino motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. This sensor c...
Delivered by Tue 13 Oct
Gravity: UART Infrared CO2 Sensor (0-50000ppm), air sensor
SKU: DF-SEN0220 | Brand: DFRobot
The Gravity UART Infrared CO2 Sensor uses non-dispersive infrared (NDIR) technology to measure carbon dioxide concentrations from 0 to 50,000 ppm. It offers excellent selectivity with no oxygen dependency, built-in te...
Delivered by Tue 13 Oct
Gravity: Analog Slide Position (Potentiometer) Sensor For Arduino
SKU: DF-DFR0053 | Brand: DFRobot
This arduino Slide Position Sensor is based on straight-slip slide potentiometer sensor. The sensor is able to give provide the position of the slider which is often considered as a linear potentiometer . The ...
Delivered by Tue 13 Oct
Analog Sensor Cable for Arduino (10 Pack)
SKU: DF-FIT0031 | Brand: DFRobot
A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. E...
Delivered by Tue 13 Oct
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Tue 13 Oct
RFID Button - 16mm (125kHz)
SKU: SF-SEN-09417 | Brand: SparkFun
This is a simple, thumbnail-size RFID tag. These tags are great for sensing presence, identification, etc., and they’re small, so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with ...
Delivered by Tue 13 Oct
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared