Brands and Manufacturers

SKU: AF-4413 | Brand: Adafruit

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...

SKU: AF-4364 | Brand: Adafruit

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...

SKU: WS-15154-NO-PI | Brand: Waveshare

This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.Game HAT Features 3.5inch IPS screen, 480×320 resolution 60 frame experience, smoot...

SKU: DF-SEN0304 | Brand: DFRobot

DFRobot URM09 is an ultrasonic sensor specifically designed for fast ranging and obstacle avoidance application. Its measuring frequency can reach up to 50Hz. The sensor adopts built-in temperature compensation and I2...

SKU: AF-4294 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 1.0KΩ Resistors. More specifically, they are carbon film, through-hole ax...

SKU: SF-CAB-15425 | Brand: SparkFun

A USB 2.0 cable with a reversible USB-A plug on one end and USB-C on the other. The USB-A connector has been modified to insert in either orientation — just like USB-C — eliminating the usual trial-and-error of pluggi...

SKU: SF-PRT-15353 | Brand: SparkFun

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...

SKU: SF-COM-15350 | Brand: SparkFun

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in o...

SKU: SF-PRT-15306 | Brand: SparkFun

A translucent keycap designed for Cherry MX switches, perfect for custom keyboards and input devices. The clear body lets LED backlighting shine through beautifully, while still providing a smooth, professional finish...

SKU: AF-4211 | Brand: Adafruit

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. I...

SKU: EF-EF04013 | Brand: ElecFreaks

The Octopus Crash Sensor Brick is a simple collision detection module based on a momentary crash switch. When physical contact is made, the switch triggers a digital signal — making it ideal for bump detection in robo...

SKU: SF-SEN-14607 | Brand: SparkFun

Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of independent temperature detec...

SKU: DF-FIT0565 | Brand: DFRobot

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is...

SKU: AF-2821 | Brand: Adafruit

The Feather HUZZAH ESP8266 is an all-in-one Wi-Fi development board with built-in USB and battery charging. Powered by the ESP8266 with a full Wi-Fi stack, it's a compact and affordable way to add Internet connectivit...

SKU: SF-PRT-14765 | Brand: SparkFun

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...

SKU: AF-2782 | Brand: Adafruit

A pack of 25 through-hole 2.2 kΩ carbon film resistors. These standard axial-type resistors feature 0.4 mm leads that plug cleanly into solderless breadboards, making them perfect for prototyping, kits, and permanent ...

SKU: DF-DFR0535 | Brand: DFRobot

DFRobot is launching a brand new series - Sunflower, focusing on high-efficiency, small power solar energy management for IoT projects and renewable energy applications.   Solar Power Manager is ...

SKU: AF-2363 | Brand: Adafruit

This clear polycarbonate base is designed for the Raspberry Pi Model A+. It's part of a modular snap-on case system — pair it with a separately available lid in your choice of colour to create a custom combination. D...

SKU: AF-2362 | Brand: Adafruit

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations...

SKU: SF-DEV-14596 | Brand: SparkFun

If you already have or are looking to own some Circuit Stickers from Chibitronics you may be looking to add a few effects to your LEDs. The LED Effects Add-On Pack provides you with four unique stickers to make your L...