Brands and Manufacturers

SKU: EF-EF10088 | Brand: ElecFreaks

The 8 RGB Rainbow LED Ring features 8 individually addressable RGB LEDs arranged in a compact circle. Each LED has a built-in driver chip with 18 mA constant-current drive, so brightness remains consistent regardless ...

SKU: DF-SEN0335 | Brand: DFRobot

Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. ...

SKU: EC-MCS01584R | Brand: Elecrow

The Relay Shield v1.1 is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled ...

SKU: EC-ACS02453S | Brand: Elecrow

Arduino Mega ProtoShield V3.0 use with Arduino MEGA to build circuit. You can soldering the components on this shield and also you can set up circuit through the mini breadboard.Arduino Mega ProtoShield V3.0 adopts th...

SKU: LB-24-2-LED | Brand: Little Bird

Check out our tutorial here There are three pins:Signal: This pin is a signal pin, and can be used to emit a green lightMiddle Pin : This pin is another signal pin, and can be used to emit a red lightGND: Though it ...

SKU: LB-24-REED | Brand: Little Bird

A reed switch is an electrical switch which is operated when a magnetic field is brought near to it.  Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...

SKU: LB-SPEAKER-WHITE | Brand: Little Bird

The speaker itself is 3.81m (1.5") in diameter and is perfect for any project where you need an 8Ω impedance, and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wat...

SKU: LB-WEBCAM-COVER | Brand: Little Bird

Look, we're not saying anyone's watching you. We're not saying that some secret organization has taken over your webcam and is recording you, right now, as you read this sentence.And we're definitely not saying the go...

SKU: EF-EF08198 | Brand: ElecFreaks

Smart home Kit is a product about smart home project base on micro:bit which is developed by ELECFREAK. We selected executed components commonly used at home as TMP36 temperature sensor, sound sensor, crash sensor,...

SKU: EF-EF11096 | Brand: ElecFreaks

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices ...

SKU: AF-4383 | Brand: Adafruit

The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibr...

SKU: AF-4280 | Brand: Adafruit

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are nee...

SKU: AF-4187 | Brand: Adafruit

A triangle-shaped momentary pushbutton with a built-in LED, giving your control panels a distinctive retro sci-fi aesthetic. The LED and switch contacts are electrically independent, so you can control illumination se...

SKU: AF-4226 | Brand: Adafruit

The Adafruit INA260 is a precision DC power sensor that measures current, voltage, and power on either the high or low side of your circuit. With an integrated 2 mΩ (0.002Ω) 0.1% shunt resistor and 16-bit ADC, it hand...

SKU: EF-EF09083 | Brand: ElecFreaks

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. T...

SKU: EF-EF08201 | Brand: ElecFreaks

The Ring:bit Car is a small DIY smart car driven by the BBC micro:bit and the Ring:bit. The Ring:bit extends the micro:bit's 3 GPIO ports and allow for different sensors and components to be easily attached to the ...

SKU: PI-COM0302 | Brand: Pimoroni

Transistor are a type of electronic switch used for controlling the flow of a circuit and amplifying signals.They have three legs: the base, the collector, and the emitter.NPN: When a voltage is applied to the base le...

SKU: DF-DFR0555 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD...

SKU: SF-COM-14662 | Brand: SparkFun

A basic 12-button keypad in a standard telephone layout (1–9, 0, *, #), designed for easy user input with microcontrollers. The buttons are wired in a matrix format, allowing a microcontroller to scan 7 output pins to...

SKU: LB-00111 | Brand: Little Bird

 Description:The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devicesWith fixed bolt hole for easy installationGreat for DIY projectSpecification:Model: KY-040Workin...