Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
micro:bit Smart Health Kit (Without micro:bit board)
SKU: EF-EF08256 | Brand: ElecFreaks
The micro:bit Smart Health Kit has a well-selection of the Sensor:bit, Analog UV Sensor, PIR Sensor, MQ3 Alcoholic Sensor Brick, Servo and etc., we could use it to build such themes as the UV light detections, the ...
Delivered by Tue 13 Oct
Light and Colour Sensor
SKU: LB-LS1697 | Brand: Little Bird
This is the Light and Colour Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and colour measuring, proximity detection, and touch-less gesture sensing. With this Light...
Delivered by Tue 13 Oct
Lipo Charger-Type C
SKU: DF-DFR0668 | Brand: DFRobot
This is a Type-C Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. The charger adopts TP4056X lithium battery charging IC, which guar...
Delivered by Tue 13 Oct
W5100 Ethernet Shield for Arduino
SKU: EC-ASW51001E | Brand: Elecrow
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up...
Delivered by Tue 13 Oct
Micro:Bit smart Science IoT kit (without Micro:Bit)
SKU: EF-EF08203 | Brand: ElecFreaks
The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing studen...
Delivered by Tue 13 Oct
Mini On/Off Push-Button Switch
SKU: AF-3870 | Brand: Adafruit
A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode ...
Delivered by Tue 13 Oct
Resistor 1K Ohm 1/4 Watt PTH - 20 pack
SKU: SF-PRT-14492 | Brand: SparkFun
These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....
Delivered by Tue 13 Oct
Adafruit NeoPixel Ring - RGB LED w/ Integrated Drivers - 12 pixel
SKU: AF-1643 | Brand: Adafruit
Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-b...
Delivered by Tue 13 Oct
FTDI Serial TTL-232 USB Cable
SKU: AF-70 | Brand: Adafruit
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL...
Delivered by Tue 13 Oct
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB
SKU: AF-2342 | Brand: Adafruit
The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger ...
Delivered by Tue 13 Oct
Pan/Tilt Bracket Kit (Single Attachment)
SKU: SF-ROB-14391 | Brand: SparkFun
This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand applications. This particular bracket kit is the same one we use in our SparkFun Raspberry P...
Delivered by Tue 13 Oct
Momentary Pushbutton Switch - 12mm Square
SKU: SF-COM-09190 | Brand: SparkFun
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input on a PCB or a good, big reset button o...
Delivered by Tue 13 Oct
LilyPad Button Board
SKU: SF-DEV-08776 | Brand: SparkFun
We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...
Delivered by Tue 13 Oct
Lithium Ion Polymer Battery - 3.7v 350mAh
SKU: AF-2750 | Brand: Adafruit
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about...
Delivered by Tue 13 Oct
Voltage Regulator - 3.3V
SKU: SF-COM-00526 | Brand: SparkFun
The LD1117V33 is a low-dropout (LDO) positive voltage regulator with a fixed 3.3V output. With on-chip trimming providing ±1% output voltage tolerance and built-in current and thermal limiting, it's a reliable choice ...
Delivered by Tue 13 Oct
Conductive Thread Bobbin - 30ft (Stainless Steel)
SKU: SF-DEV-10867 | Brand: SparkFun
This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...
Delivered by Tue 13 Oct
Piezo Element
SKU: SF-SEN-10293 | Brand: SparkFun
A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...
Delivered by Tue 13 Oct
Adafruit GEMMA M0 - Miniature wearable electronic platform
SKU: AF-3501 | Brand: Adafruit
The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...
Delivered by Tue 13 Oct
PicoGo Mobile Robot, Based on Raspberry Pi Pico, Self Driving, Remote Control
SKU: WS-20380 | Brand: Waveshare
The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, a...
Delivered by Tue 13 Oct
Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller
SKU: AF-5724 | Brand: Adafruit
The Adafruit RP2040 CAN Bus Feather combines the powerful RP2040 microcontroller with an MCP25625 CAN controller and transceiver, giving you a ready-to-go CAN Bus interface in the compact Feather form factor. No solde...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
