Brands and Manufacturers

SKU: AF-158 | Brand: Adafruit

Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one wou...

SKU: AF-3328 | Brand: Adafruit

The Adafruit PT100 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter. It reads 2-, 3-, or 4-wire PT100 platinum resistance temperature detectors over SPI, deliver...

SKU: AF-5708 | Brand: Adafruit

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: AF-4479 | Brand: Adafruit

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...

SKU: AF-5190 | Brand: Adafruit

The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...

SKU: AF-3072 | Brand: Adafruit

The Adafruit RFM95W LoRa Radio Transceiver Breakout lets you send data over very long distances using the 868 or 915 MHz licence-free ISM bands. Based on the SX1276 LoRa chipset, this breakout achieves ranges of appro...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: AF-5880 | Brand: Adafruit

The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmwa...

SKU: AF-5378 | Brand: Adafruit

The Adafruit Right Angle VEML7700 Lux Sensor is an I2C ambient light sensor that measures calibrated lux values rather than arbitrary brightness numbers. Its unique right-angle orientation senses light coming parallel...

SKU: AF-5221 | Brand: Adafruit

This breakout PCB converts the ANO rotary navigation encoder's non-standard pinout into a straightforward, breadboard-friendly header strip. The ANO encoder combines a rotary encoder with directional and centre-push b...

SKU: AF-4632 | Brand: Adafruit

The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connec...

SKU: AF-161 | Brand: Adafruit

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...

SKU: AF-5743 | Brand: Adafruit

The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of you...

SKU: AF-5578 | Brand: Adafruit

The BS612 is a compact, fully configurable mini PIR motion sensor that detects movement from approximately 3–8 metres away with a 120° detection spread. Its small form factor makes it ideal for unobtrusive motion-sens...

SKU: AF-4831 | Brand: Adafruit

The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode...

SKU: AF-4716 | Brand: Adafruit

The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...

SKU: AF-3966 | Brand: Adafruit

The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...

SKU: AF-157 | Brand: Adafruit

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to...

SKU: AF-5990 | Brand: Adafruit

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-ch...