Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Tue 13 Oct
SparkFun Line Sensor Breakout - QRE1113 (Digital)
SKU: SF-ROB-09454 | Brand: SparkFun
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...
Delivered by Tue 13 Oct
SparkFun RGB LED Breakout - WS2812B (with Headers) - SparkFun Electronics
SKU: SF-BOB-29762 | Brand: SparkFun
The WS2812 (often referred to as a "NeoPixel") has become the standard for addressable LED projects. This RGB LED Breakout board, now with pre-soldered right-angle headers, is the absolute easiest way to st...
Delivered by Tue 13 Oct
Kitronik Compact Motor Driver Board for the BBC micro:bit
SKU: KI-5698 | Brand: Kitronik
A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, ov...
Delivered by Tue 13 Oct
All-in-one Starter Kit for ESP32-P4 with Common Board design, 16 Modules and AI Lessons
SKU: EC-SEE00804D | Brand: Elecrow
The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilitie...
Delivered by Tue 13 Oct
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
SKU: PL-3753 | Brand: Pololu
The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...
Delivered by Tue 13 Oct
Kitronik Compact All-In-One Robotics Board for BBC micro:bit
SKU: KI-5693 | Brand: Kitronik
With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily be...
Delivered by Tue 13 Oct
RP2040 Microcontroller - Bulk 500
SKU: RP-RP2040-500 | Brand: Raspberry Pi Ltd
The RP2040 is Raspberry Pi's dual-core Arm Cortex-M0+ microcontroller in a compact 7mm × 7mm QFN-56 package. Built on 40nm silicon, it delivers high performance for integer workloads with flexible I/O for connecting t...
Delivered by Tue 13 Oct
Cockatoo v2 - Micro:bit simple lighting breakout
SKU: LB-COCKATOO-V2 | Brand: Little Bird
The Cockatoo v2 is a simple breakout board for the BBC micro:bit, designed for school projects involving basic lighting circuits. Slide the micro:bit into the edge connector and access three pins — Pin 2, 3.3 V, and G...
Delivered by Tue 13 Oct
TinyPICO V3 USB-C with u.FL by Unexpected Maker
SKU: AF-5750 | Brand: Adafruit
TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: Thi...
Delivered by Tue 13 Oct
PiCube: 4x4x4 LED Cube Unassembled Red
SKU: SB-PICUBE-RED | Brand: Little Bird
PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Compo...
Delivered by Tue 13 Oct
Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
SKU: WS-21738 | Brand: Waveshare
The CM4-Duino is an Arduino-compatible base board for the Raspberry Pi Compute Module 4. It breaks out the CM4's key interfaces — HDMI, USB, M.2 NVMe, camera, and GPIO — in a compact form factor with Arduino-style pin...
Delivered by Tue 13 Oct
SparkFun MicroMod ESP32 Processor
SKU: SF-WRL-16781 | Brand: SparkFun
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...
Delivered by Tue 13 Oct
Ultra Sonic range measurement module
SKU: SS-101990004 | Brand: Seeed Studio
This is a non-contact distance measurement module, which is also compatible with electronic brick. It’s designed for easy modular project usage with industrial performance. Features Detecting range: 3cm-4...
Delivered by Tue 13 Oct
4-Way Tilt Sensor - RPI-1031
SKU: SF-SEN-10313 | Brand: SparkFun
The RPI-1031 is a 4-directional tilt sensor that detects orientation using internal infrared emitters and detectors. Unlike simple single-axis tilt switches, this sensor can distinguish between multiple orientations, ...
Delivered by Tue 13 Oct
SparkFun Quadstepper Motor Driver Board
SKU: SF-ROB-10507 | Brand: SparkFun
The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable o...
Delivered by Tue 13 Oct
SparkFun Navigation Switch Breakout
SKU: SF-COM-08236 | Brand: SparkFun
This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...
Delivered by Tue 13 Oct
SparkFun LED RingCoder Breakout - RGB
SKU: SF-BOB-11040 | Brand: SparkFun
The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...
Delivered by Tue 13 Oct
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)
SKU: PL-2481 | Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...
Delivered by Tue 13 Oct
Ultrasonic Scanner kit(180°)
SKU: DF-KIT0020 | Brand: DFRobot
An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared