Books & Reading

SKU: LB-LS6232 | Brand: Little Bird

For better audio quality when playing music, consider using a USB audio card with your Raspberry Pi. This upgrade can greatly enhance sound quality and volume since the on-board audio is produced through a minimally f...

SKU: LB-SPEAKER | Brand: Little Bird

This breadboard-compatible speaker is a Little Bird exclusive, pre-wired with jumper wires and standard header pins so it plugs directly into a solderless breadboard. It's a quick, no-solder way to add audio output to...

SKU: LB-BK-SPEAKER | Brand: Little Bird

A bulk pack of 20 breadboard-compatible speakers — a Little Bird exclusive. Each speaker comes with jumper wires and standard header pins pre-soldered, so it plugs directly into a breadboard with no extra wiring neede...

SKU: SF-DEV-12898 | Brand: SparkFun

The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other ...

SKU: LB-LS6972x2 | Brand: Little Bird

A compact stereo speaker pair for small audio projects, handheld devices, and embedded builds. Each 45mm driver is rated at 4Ω and 3W, delivering clear, balanced sound in a slim form factor. Pre-wired with a PH2.0 plu...

SKU: AF-6251 | Brand: Adafruit

The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I...

SKU: LB-LS6923 | Brand: Little Bird

This compact voice recording box lets you record up to 2 or 4 minutes of audio and play it back at the press of a button. It's a simple, self-contained module — no soldering or programming required — making it perfect...

SKU: AF-6421 | Brand: Adafruit

The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advance...

SKU: LB-LS6069 | Brand: Little Bird

This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to a...

SKU: SF-COM-27247 | Brand: SparkFun

A compact through-hole speaker that solders directly to your PCB. When you need better audio quality than a piezo buzzer but don't have room for a full-sized speaker, this 30mm unit hits the sweet spot – clear enough ...

SKU: AF-4346 | Brand: Adafruit

The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pair...

SKU: AF-1780 | Brand: Adafruit

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and als...

SKU: AF-4740 | Brand: Adafruit

The Adafruit MIDI FeatherWing Kit adds MIDI input and output to any compatible Feather board. Featuring both DIN-5 MIDI jacks, a 3.3V optical isolator for safe MIDI input, and indicator LEDs for transmit/receive activ...

SKU: AF-6250 | Brand: Adafruit

The Adafruit PCM5102 I2S DAC converts digital I2S audio into excellent stereo line-level output through a 3.5mm jack. With an impressive 112dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pi...

SKU: PR-PIM138 | Brand: Little Bird

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pu...