Bluetooth Modules

SKU: SF-DEV-17588 | Brand: SparkFun

The BGM220 Explorer Kit from Silicon Labs is an ultra-low-cost, compact development and evaluation platform for the BGM220P Bluetooth Module. With a mikroBUS socket and Qwiic connector built in, you can quickly add fu...

SKU: DF-DFR0624 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...

SKU: SF-WRL-15574 | Brand: SparkFun

The SparkFun Thing Plus - Artemis combines the powerful Artemis module with the popular Thing Plus footprint and Feather-compatible pinout. With 1MB flash, 384KB RAM, Bluetooth, and a built-in digital MEMS microphone,...

SKU: SF-DEV-15442 | Brand: SparkFun

The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the...

SKU: SF-DEV-15443 | Brand: SparkFun

The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement f...

SKU: AF-2829 | Brand: Adafruit

The Feather 32u4 Bluefruit LE combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging in one compact board. BLE is supported by all modern smartphones and...

SKU: DF-DFR0492 | Brand: DFRobot

DFRobot FireBeetle series are low power consumption microcontrollers designed for Internet of Things (IoT) development. This Bluetooth controller combines Bluetooth Low Energy 4.1 with Arduino controller, offering...

SKU: AF-4077 | Brand: Adafruit

If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF52832 chip that comes integrated with BLE radio as well as ...

SKU: AF-4076 | Brand: Adafruit

If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF51822 Cortex M0 chip that comes integrated with BLE radio as w...

SKU: AF-3242 | Brand: Adafruit

The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you ca...

SKU: DF-TEL0002 | Brand: DFRobot

A compact USB Bluetooth 2.0 adapter for adding wireless Bluetooth connectivity to your computer. Simply plug it into a USB port and connect to phones, headsets, keyboards, mice, and other Bluetooth devices. This adap...

SKU: AF-2479 | Brand: Adafruit

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...

SKU: DF-TEL0026 | Brand: DFRobot

A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable bau...

SKU: AF-2633 | Brand: Adafruit

The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...

SKU: DF-DFR0267 | Brand: DFRobot

The Bluno integrates a TI CC2540 Bluetooth 4.0 (BLE) chip with an Arduino Uno-compatible development board, enabling wireless communication for your Arduino projects. It supports wireless programming via BLE, Bluetoot...

SKU: DF-DFR0356 | Brand: DFRobot

INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity inter...

SKU: AF-2267 | Brand: Adafruit

The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standard serial/UART connection. In it's simplest form, it w...

SKU: SF-WRL-21293 | Brand: SparkFun

Build low-power 2.4GHz Bluetooth beacon prototypes with this compact breakout based on the InPlay IN100 NanoBeacon. It is designed for wireless sensor monitoring, asset tracking, retail beacons and DIY beacon tags for...

SKU: SF-WRL-30414 | Brand: SparkFun

Turn a wired UART link into a dependable short-range Bluetooth® serial connection for microcontrollers, computers and mobile devices. It pairs, connects and passes data between TX and RX lines, buffering serial stream...

SKU: DF-DFR1222 | Brand: DFRobot

Built around Espressif's ESP32-C5, this compact FireBeetle board is designed for smart home, robotics and wider IoT projects that need strong wireless performance with low power use. It combines a 240 MHz RISC-V proce...