Bluetooth Modules

SKU: WS-25081 | Brand: Waveshare

A compact ESP32-S3 development board based on the ESP32-S3FH4R2 dual-core processor running at up to 240MHz. Features 4MB flash, 2MB PSRAM, 2.4GHz Wi-Fi (802.11 b/g/n), and Bluetooth 5 (LE). The castellated module des...

SKU: WS-25452 | Brand: Waveshare

A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module ...

SKU: DF-DFR1075 | Brand: DFRobot

The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standar...

SKU: AF-3406 | Brand: Adafruit

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your appli...

SKU: AF-4516 | Brand: Adafruit

The Feather nRF52840 Sense takes the popular Feather nRF52840 Express and adds a suite of on-board environmental and motion sensors. It features Bluetooth Low Energy, native USB, CircuitPython and Arduino support, plu...

SKU: AF-5344 | Brand: Adafruit

ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it ...

SKU: AF-2995 | Brand: Adafruit

The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provide...

SKU: DF-TEL0111 | Brand: DFRobot

INTRODUCTION   The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compare...

SKU: SF-WRL-21637 | Brand: SparkFun

The SparkFun Thing Plus - NORA-W306 is a Feather form-factor development board equipped with the u-blox NORA-W306 module. The module contains a Realtek RTL8720DF, which has an integrated single-chip low-power dual-ban...

SKU: AF-3574 | Brand: Adafruit

The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...

SKU: DF-DFR0624 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...

SKU: SF-WRL-29424 | Brand: SparkFun

This compact, certified wireless module is designed for integration into custom PCBs and microcontroller products. It combines the Infineon CYW43439 chipset with single-band 2.4 GHz Wi-Fi 4 (802.11n) and Bluetooth 5.2...

SKU: SF-WRL-21604 | Brand: SparkFun

The BMD-34 series is a compact, surface-mount multiprotocol RF module for low-power embedded designs needing Bluetooth 5, Thread or Zigbee connectivity at 2.4 GHz. It is based on the Nordic nRF52840 and combines an Ar...

SKU: AF-5672 | Brand: Adafruit

The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1,  a general-purpose Wi-Fi + Bluetooth LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth LE functions. T...

SKU: SS-113991054 | Brand: Seeed Studio

The Seeed Studio XIAO ESP32C3 is a compact microcontroller board built around the ESP32-C3 RISC-V SoC. It features complete Wi-Fi and Bluetooth 5.0/BLE connectivity in the signature XIAO thumb-sized form factor (21 × ...

SKU: EC-CCF32323S | Brand: Elecrow

The ESP32S is a WiFi and Bluetooth combo module built around the Espressif ESP32 dual-core processor. It supports 802.11 b/g/n WiFi with speeds up to 150 Mbps and Bluetooth v4.2 (both Classic and BLE), making it a ver...

SKU: AF-4062 | Brand: Adafruit

The Feather nRF52840 Express upgrades the nRF52 Bluefruit with the Nordic nRF52840 — featuring 1 MB flash, 256 KB SRAM, native USB, and Bluetooth Low Energy in a single chip. Native USB means no separate serial conver...

SKU: PI-PYC001 | Brand: Pimoroni

The Pycom WiPy 2.0 is a compact, MicroPython-enabled IoT development platform built on the Espressif ESP32 chipset. With dual processors, 1 km WiFi range, and Bluetooth Low Energy, it delivers enterprise-grade wireles...

SKU: PI-PYC002 | Brand: Pimoroni

The SiPy from Pycom is a multi-network IoT development board combining Sigfox, WiFi, and Bluetooth (classic + BLE) on a single ESP32-powered module. Programmable with MicroPython and the Pymakr IDE, it enables rapid I...

SKU: PI-ESP004 | Brand: Pimoroni

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...