Bluetooth Modules

SKU: LB-LR0109 | Brand: Little Bird

Add Bluetooth functionality to your project with the HC-05 Bluetooth Module. The module is found on a breakout board which provides breadboard-friendly headers for power, ground, TX, RX and enable pins. The breakou...

SKU: WS-25452 | Brand: Waveshare

A compact ESP32-C3 development board based on the ESP32-C3FN4 single-core RISC-V processor running at up to 160 MHz. With 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), 4 MB onboard flash, and a castellated module ...

SKU: WS-13460 | Brand: Waveshare

NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufact...

SKU: LB-LS3758 | Brand: Little Bird

JDY-23 transparent transmission module is based on Bluetooth 5.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 4db, maximum transmission distance...

SKU: DF-DFR0296 | Brand: DFRobot

The Bluno Nano combines an Arduino Nano-compatible ATmega328 microcontroller with an integrated TI CC2540 Bluetooth 4.0 (BLE) module in a compact 53 × 19 mm form factor. It enables wireless communication, wireless pro...

SKU: DF-DFR0305 | Brand: DFRobot

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BL...

SKU: AF-3406 | Brand: Adafruit

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your appli...

SKU: SF-DEV-23386 | Brand: SparkFun

Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individuall...

SKU: LB-LS1217 | Brand: Little Bird

JDY-08 BLE Serial Transmission Module Compatible CC2541  JDY-08 transparent transmission module is based on the Bluetooth 4.0 protocol standard, the working frequency of 2.4GHZ range, modulation scheme is GFSK...

SKU: SF-WRL-24113 | Brand: SparkFun

This board creates a wireless Bluetooth® serial UART link, making it a handy replacement for short serial cables. Pair it, connect it, and pass serial data between TX/RX lines, with serial streams supported from 2400 ...

SKU: SF-WRL-23287 | Brand: SparkFun

The SparkFun BlueSMiRF v2 with headers is a wireless Bluetooth® serial link. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit ...

SKU: EC-CBL37551BE | Brand: Elecrow

The Elecrow Bluetooth Bee is a Bluetooth V2.0+EDR serial module in an XBee-compatible form factor. It provides transparent wireless serial communication at up to 2.4 GHz, making it easy to add Bluetooth connectivity t...

SKU: EC-MCS01108S | Brand: Elecrow

The ELE Bluetooth Shield V1.2 adds wireless serial communication to your Arduino or Crowduino via Bluetooth V2.0+EDR. Simply stack it onto your board, select two digital pins (D0–D7) for software serial, and start sen...

SKU: AF-3379 | Brand: Adafruit

The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug st...

SKU: AF-2479 | Brand: Adafruit

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...