Batteries

SKU: LB-LS0821 | Brand: Little Bird

This battery enclosure (with switch) for the BBC micro:bit is the perfect way to power your micro:bit on the go. Specifications:  2x AAA Battery Enclosure Cable Length: ~14cm JST Cable Connector (compatible w...

SKU: LB-PAPER-BATTERY | Brand: Little Bird

Paper circuits are a fantastic way to  teach the basics and fundamentals of creating an electric circuit without the need to solder or code a single thing! If you are unfamiliar, a paper circuit is a function...

SKU: LB-MICROACC | Brand: Little Bird

Handy accessories to get you started with micro:bit! This  little kit has a battery pack with switch for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding...

SKU: LB-LR0295 | Brand: Little Bird

A simple 9V battery holder with a DC barrel connector. Provides a convenient way to mount and connect a 9V battery to your electronics projects. Key Features DC Barrel Connector – Standard connector for easy integr...

SKU: PL-1152 | Brand: Pololu

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with thr...

SKU: SF-PRT-09547 | Brand: SparkFun

A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: LB-LS5508 | Brand: Little Bird

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...

SKU: SF-PRT-15101 | Brand: SparkFun

This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perf...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: LB-BATTERYAA | Brand: Little Bird

A 2× AA battery holder with on/off switch, designed for powering the BBC micro:bit on the go. The JST connector plugs directly into the micro:bit's battery port, and the ~14 cm cable provides enough length for flexibl...

SKU: LB-LR0335-B | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...

SKU: LB-LR0335-PI | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant pink when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: LB-LR0335-LB | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant light blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow s...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: LB-1147 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides a...

SKU: EF-EF10095 | Brand: ElecFreaks

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, ...