Batteries (LiPo, NiMH, coin cell)

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: LB-1147 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides a...

SKU: EF-EF10095 | Brand: ElecFreaks

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, ...

SKU: PI-COM1305 | Brand: Pimoroni

A compact 2×AAA battery holder with a built-in power switch and JST connector, compatible with micro:bit and other boards that accept JST battery inputs. This is the same battery holder included in our micro:bit acces...

SKU: SF-PRT-12083 | Brand: SparkFun

This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...

SKU: SF-PRT-11892 | Brand: SparkFun

Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connect...

SKU: AF-727 | Brand: Adafruit

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeab...

SKU: DF-DFR0969 | Brand: DFRobot

A dual-slot 18650 battery holder with built-in charging and regulated power outputs, perfect for powering microcontrollers, sensors, and portable electronics projects. Simply install two 18650 lithium batteries and us...

SKU: DF-FIT0610 | Brand: DFRobot

This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...

SKU: AF-4193 | Brand: Adafruit

A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and p...

SKU: LB-LR0335-FG | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant fluorescent green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even...

SKU: AF-4779 | Brand: Adafruit

This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector w...

SKU: LB-LR0309-16 | Brand: Little Bird

A flat 4×AA battery holder with a 2.1mm DC barrel jack connector, providing an easy way to power Arduino boards and other projects that accept a DC barrel plug. With four alkaline AA batteries installed, it delivers a...

SKU: LB-LR0294 | Brand: Little Bird

A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alk...

SKU: DF-FIT0079 | Brand: DFRobot

A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...

SKU: LB-LR0335-O | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant orange when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: SF-PRT-00552 | Brand: SparkFun

Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.

SKU: SF-PRT-10891 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...

SKU: AF-875 | Brand: Adafruit

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...

SKU: LB-LS3337 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Thre...