Arduino

SKU: DF-DFR0256 | Brand: DFRobot

The Mega Multi IO Expansion Shield lets you stack up to four shields simultaneously on an Arduino Mega or Due without worrying about I/O pin conflicts. All Mega I/O pins are expanded and routed to four separate shield...

SKU: PL-1239 | Brand: Pololu

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...

SKU: PL-1242 | Brand: Pololu

The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a si...

SKU: DF-FIT0328 | Brand: DFRobot

A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the disp...

SKU: SF-CAB-00512 | Brand: SparkFun

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino bo...

SKU: PL-1219 | Brand: Pololu

This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more...

SKU: DF-SEN0164 | Brand: DFRobot

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...

SKU: SF-BOB-00496 | Brand: SparkFun

The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...

SKU: DF-DFR0274 | Brand: DFRobot

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED stri...

SKU: AF-3061 | Brand: Adafruit

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz ant...

SKU: AF-3060 | Brand: Adafruit

The Adafruit ATWINC1500 WiFi Breakout with uFL Connector adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. This version features a uFL antenna connector instead of an onboar...

SKU: SF-SEN-00251 | Brand: SparkFun

36" high temperature Type-K Thermocouple with glass braid insulation.

SKU: SF-GPS-00177 | Brand: SparkFun

This embedded GPS antenna with built-in LNA (Low Noise Amplifier) is designed for small, mobile applications. Its compact, unpackaged form factor makes it ideal for creating truly small GPS prototypes. Comes with a 5-...

SKU: DF-DFR0008 | Brand: DFRobot

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface...

SKU: DF-DFR0061 | Brand: DFRobot

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...

SKU: SF-COM-11705 | Brand: SparkFun

We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable, but the whole point of using the barrel jacks was s...

SKU: DF-DFR0267 | Brand: DFRobot

The Bluno integrates a TI CC2540 Bluetooth 4.0 (BLE) chip with an Arduino Uno-compatible development board, enabling wireless communication for your Arduino projects. It supports wireless programming via BLE, Bluetoot...

SKU: DF-DFR0022 | Brand: DFRobot

The Gravity Analogue Grayscale Sensor measures reflected light intensity, outputting an analogue value that ranges from black (low) to white (high). It uses a photocell paired with an integrated white LED to illuminat...

SKU: SF-COM-11706 | Brand: SparkFun

Do you fear that your power may not be “far reaching” enough? How would another 3' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Do...

SKU: DF-ROB0004 | Brand: DFRobot

The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated...