Arduino

SKU: DF-SEN0305-2 | Brand: DFRobot

This kit combines the HUSKYLENS AI machine vision sensor with DFRobot's Devastator Tank Mobile Robot Platform and the Romeo V2 Arduino robot board. It is designed for building vision-enabled robots without needing to ...

SKU: DF-SEN0451 | Brand: DFRobot

This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environment...

SKU: DF-KIT0131 | Brand: DFRobot

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data c...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: DF-DFR1256 | Brand: DFRobot

The Arduino UNO Q is a hybrid development board that combines a Qualcomm® Dragonwing™ MPU running Linux Debian with an STM32 real-time MCU. It is designed for projects that need both single-board-computer style proces...

SKU: DF-SEN0656 | Brand: DFRobot

The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and p...

SKU: DF-DRI0058 | Brand: DFRobot

This compact DFRobot driver board is made for precise control of brushless DC motors using Field-Oriented Control (FOC). At just 26 x 21.5mm, it is well suited to tight builds where smooth motion, low noise and respon...

SKU: DF-SEN0628 | Brand: DFRobot

This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interacti...

SKU: DF-FIT0625 | Brand: DFRobot

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable...

SKU: DF-DFR0216-2 | Brand: DFRobot

This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source developm...

SKU: DF-SER0057 | Brand: DFRobot

This clutch servo is designed for robots, models and other mechanisms where the servo may be pushed, stalled or forced out of position during use. Its clutch function helps protect the servo by allowing it to reset an...

SKU: DF-SEN0666 | Brand: DFRobot

This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure...

SKU: DF-DFR1092 | Brand: DFRobot

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while hel...

SKU: SF-DEV-27924 | Brand: SparkFun

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when...

SKU: SF-SEN-15191 | Brand: SparkFun

This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output i...

SKU: SF-SEN-20659 | Brand: SparkFun

Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting tr...

SKU: SF-SEN-24049 | Brand: SparkFun

This economical ultrasonic module provides non-contact distance measurement for range-finding and obstacle-detection projects. It measures from 2cm to 400cm, with ranging accuracy that can reach up to 3mm.Each module ...

SKU: SF-SEN-29260 | Brand: SparkFun

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and ...

SKU: SF-SEN-26092 | Brand: SparkFun

Visualise magnetic fields in real time with a dense 8x8 array of Hall-effect sensors. This tile lets you observe nearby magnets, current flow in wires and fields generated by electric motors as a live magnetic image.T...

SKU: AF-6407 | Brand: Adafruit

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...