Arduino

SKU: DF-SEN0185 | Brand: DFRobot

INTRODUCTION what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right! This Hall sensor knows whether there is a magne...

SKU: AF-512 | Brand: Adafruit

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...

SKU: DF-FIT0324 | Brand: DFRobot

INTRODUCTION This adapter is especially designed for DFRobot 12V DC Motors, adding the compatibility factor for those products without customized connectors or external power supplies. ...

SKU: DF-DFR0310 | Brand: DFRobot

Time to upgrade! This is a upper deck PCB for the 2WD MiniQ Robot Chassis. It is compatible with 9g micro servo and URM ultrasonic mounting bracket. With this upper deck you can upgrade the MiniQ with more senso...

SKU: SF-WRL-12847 | Brand: SparkFun

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino...

SKU: SF-SEN-12829 | Brand: SparkFun

If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 br...

SKU: AF-1873 | Brand: Adafruit

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins t...

SKU: DF-DFR0407 | Brand: DFRobot

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagneti...

SKU: AF-613 | Brand: Adafruit

Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC...

SKU: SF-PRT-10366 | Brand: SparkFun

A simple 6-pin jumper wire cable with JST RE connectors on both ends. Perfect for board-to-board connections using standard 0.1" (2.54mm) breakaway headers. At 4" (100mm) long, it keeps wiring tidy in compact builds. ...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: SF-SEN-12728 | Brand: SparkFun

Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...

SKU: DF-SEN0192 | Brand: DFRobot

INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...

SKU: DF-DFR0382 | Brand: DFRobot

An Arduino-compatible shield featuring a 4-digit 7-segment digital tube display (common cathode, 0.56") with 5 input buttons. Uses I2C to drive the display, providing an easy interface for menus, controls, and numeric...

SKU: AF-1906 | Brand: Adafruit

The Pixy2 (CMUcam5) is a smart vision sensor that can be taught to detect objects, track lines, and identify intersections — all at 60 frames per second. It offloads image processing from your microcontroller, sending...

SKU: AF-1912 | Brand: Adafruit

A four-digit 0.54-inch blue alphanumeric LED display with an I2C backpack. Each digit has 14 segments, allowing it to display letters, numbers, and basic symbols. The bright blue LEDs on a black surface are readable f...

SKU: AF-1824 | Brand: Adafruit

This phone-style 3×4 matrix keypad features 12 buttons (0–9, *, #) with telephone-layout lettering printed on the keys. It uses a matrix scanning arrangement requiring only 7 microcontroller pins (3 columns + 4 rows) ...

SKU: AF-3444 | Brand: Adafruit

The Adafruit DotStar High Density 8×8 Grid packs 64 individually addressable RGB LEDs into a compact 25.4 mm × 25.4 mm (1" × 1") square. Each DotStar pixel features a built-in PWM driver and is controlled via a 2-wire...

SKU: DF-DFR0356 | Brand: DFRobot

INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity inter...

SKU: AF-716 | Brand: Adafruit

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and k...