Arduino
Official Arduino boards, shields, kits, and compatible accessories. The open-source platform that started the maker movement. Uno, Mega, Nano, and more.
HRLV - MaxSonar - EZ (MB1013)
SKU: DF-SEN0135 | Brand: DFRobot
The HRLV-MaxSonar-EZ (MB1013) is a high-resolution ultrasonic distance sensor with 1 mm resolution and a range of up to 5 metres. It features multiple output formats, internal temperature compensation, virtually no de...
Delivered by Mon 22 Jun
Hook-up Stranded Wire - White (22 AWG)
SKU: SF-PRT-08866 | Brand: SparkFun
Standard 22 AWG stranded hook-up wire in white. Stranded wire is more flexible than solid core, making it ideal for projects where the wire needs to bend or will be subject to repeated movement and stress. Specificat...
Delivered by Mon 22 Jun
Hook-up Stranded Wire - Red (22 AWG)
SKU: SF-PRT-08865 | Brand: SparkFun
Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.
Delivered by Mon 22 Jun
SparkFun Ardumoto - Motor Driver Shield
SKU: SF-DEV-14129 | Brand: SparkFun
The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. ...
Delivered by Mon 22 Jun
Gravity: Steam Sensor
SKU: DF-SEN0121 | Brand: DFRobot
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notic...
Delivered by Thu 11 Jun
NeoPixel Mini 3535 RGB LEDs w/ Integrated Driver Chip - White [Pack of 10]
SKU: AF-2659 | Brand: Adafruit
A pack of 10 miniature 3535-format (3.5 × 3.5 mm) NeoPixel RGB LEDs with white casing and integrated WS2811-compatible driver chips. These are half the size of standard 5 × 5 mm NeoPixels, making them the most compact...
Delivered by Wed 1 Jul
10 DOF Mems IMU Sensor (Arduino Compatible)
SKU: DF-SEN0140 | Brand: DFRobot
The DFRobot 10 DOF MEMS IMU Sensor combines four sensors on a single compact board — the ADXL345 accelerometer, ITG-3205 gyroscope, HMC5883L magnetometer, and BMP085 barometric pressure sensor. Together they provide 1...
Delivered by Mon 22 Jun
FlexiForce Pressure Sensor - 1lb.
SKU: SF-SEN-08713 | Brand: SparkFun
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but...
Delivered by Mon 22 Jun
SparkFun Wireless Joystick Kit
SKU: SF-KIT-14051 | Brand: SparkFun
The SparkFun Wireless Joystick Kit gives you a customisable wireless controller for XBee-based projects. Built around the SAMD21 microcontroller, it provides a flexible alternative to hobby RC transmitters — configure...
Delivered by Mon 22 Jun
BlinkM - I2C Controlled RGB LED
SKU: SF-COM-08579 | Brand: SparkFun
BlinkM is a “Smart LED”, a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displ...
Delivered by Mon 22 Jun
Arduino DUE - An Arduino Microcontroller Board
SKU: DF-DFR0220 | Brand: DFRobot
The Arduino Due is Arduino's first ARM-based development board, powered by the Atmel SAM3X8E — a 32-bit Cortex-M3 processor running at 84MHz. With 54 digital I/O pins, 12 analogue inputs, 2 DAC outputs, and USB-OTG, i...
Delivered by Mon 22 Jun
7-Segment Display - 6.5 (Red)
SKU: SF-COM-08530 | Brand: SparkFun
A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric...
Delivered by Mon 22 Jun
SparkFun Coulomb Counter Breakout - LTC4150
SKU: SF-BOB-12052 | Brand: SparkFun
Odometers are extremely useful for cars, they tell you how far you have gone, wouldn’t it be nice if you were able to have a device that does the same for electrical current? The LTC4150 SparkFun Coulomb Counter Break...
Delivered by Mon 22 Jun
LilyPad Arduino USB - ATmega32U4 Board
SKU: SF-DEV-12049 | Brand: SparkFun
The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the ...
Delivered by Thu 11 Jun
Ambient Light Sensor - TEMT6000x01
SKU: SF-COM-08348 | Brand: SparkFun
The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...
Delivered by Thu 11 Jun
Polarized Connectors - Header (3-Pin)
SKU: SF-PRT-08232 | Brand: SparkFun
A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Spec...
Delivered by Thu 11 Jun
Cherokey: 4WD Arduino Mobile Robot
SKU: DF-ROB0102 | Brand: DFRobot
The Cherokey 4WD arduino mobile robot is a versatile mobile robot jeep compatible with the most popular microcontrollers like DFRduino UNO R3 - Arduino Compatible, Mega2560 (arduino microcontroller board), Romeo V...
Delivered by Mon 22 Jun
Adafruit ATWINC1500 WiFi Breakout
SKU: AF-2999 | Brand: Adafruit
The Adafruit ATWINC1500 WiFi Breakout adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. Built around the Microchip ATWINC1500 module, this FCC-certified breakout delivers re...
Delivered by Wed 1 Jul
The Laser Photoelectric Switch GAB100M-AK-5V
SKU: DF-FIT0319 | Brand: DFRobot
This is a photoelectric switch that is composed of emitter and receptor.The emitter consists of a laser diode,and the laser has the characteristics of high precision, good orientation etc.The receptor consists of a p...
Delivered by Mon 22 Jun
LED Current Meter 10A (Blue)
SKU: DF-DFR0244-B | Brand: DFRobot
This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy. Best suitable for current display in the circuit.Just apply four wires without any extra circuit or components, it gives the reading s...
Delivered by Mon 22 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
