Arduino

SKU: DF-DFR0021-W | Brand: DFRobot

A simple digital white LED module with Gravity interface. Plugs directly into DFRobot IO/Sensor expansion shields for easy integration with Arduino projects — ideal for beginners learning digital output control. Spec...

SKU: DF-SEN0018 | Brand: DFRobot

This is a simple to use arduino motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. This sensor c...

SKU: DF-DFR0462 | Brand: DFRobot

Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Ardui...

SKU: DF-DFR0053 | Brand: DFRobot

This arduino Slide Position Sensor is based on straight-slip slide potentiometer sensor. The sensor is able to give provide the position of the slider which is often considered as a linear potentiometer . The ...

SKU: DF-FIT0031 | Brand: DFRobot

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. E...

SKU: SF-COM-09542 | Brand: SparkFun

The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...

SKU: SF-SEN-09404 | Brand: SparkFun

This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from ...

SKU: DF-DFR0487 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: AF-3614 | Brand: Adafruit

Harder, better, faster, stronger! All the control and customization for your robot project. The Parallax Feedback 360° High Speed Servo has the functionality of a light-duty servo, continuous rotation servo, h...

SKU: DF-SEN0223 | Brand: DFRobot

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conducto...

SKU: SF-SEN-08685 | Brand: SparkFun

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but th...

SKU: LB-LR0122 | Brand: Little Bird

This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...

SKU: DF-DFR1193 | Brand: DFRobot

The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address ...

SKU: DF-SEN0648 | Brand: DFRobot

The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, indu...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: SF-GPS-28138 | Brand: SparkFun

The SparkPNT GNSS Flex Module features the Septentrio mosaic-X5, an industrial-grade multi-band, multi-constellation GNSS receiver capable of centimetre-level RTK positioning accuracy. Designed for demanding applicati...

SKU: SF-SEN-28798 | Brand: SparkFun

  This is the HC-SR04 ultrasonic distance sensor, now in Red! This economical sensor offers non-contact measurement functionality ranging from 2cm to 400cm, with a ranging accuracy of up to 3mm. Each HC-SR04 ...

SKU: SF-WRL-28434 | Brand: SparkFun

The SparkFun IoT RedBoard combines the powerful ESP32-D0WDQ6 microcontroller with MicroPython pre-installed, letting you start coding IoT projects right out of the box. No need for complex toolchains – just connect vi...

SKU: KS-FB0001 | Brand: Keyestudio

 The FoxBit is a versatile development board built around the powerful ESP32-D0WDQ6 dual-core microcontroller, designed for education, makers, and electronics enthusiasts. Ideal for IoT, STEAM education, smart c...

SKU: DF-SEN0672 | Brand: DFRobot

The Benewake TFS20-L is an ultra-compact ToF LiDAR sensor weighing just 1.35g. With 20m range, centimetre-level accuracy, and 100K LUX sunlight resistance, it's designed for drones, robots, and space-constrained appli...