Arduino

SKU: AF-1164 | Brand: Adafruit

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...

SKU: AF-4081 | Brand: Adafruit

This flat vibration switch is a low-sensitivity, directional trigger that closes its circuit when bumped from the side. Inside, a soft spring coiled around a metal pin makes contact when vibration or impact occurs, ac...

SKU: SF-DEV-14812 | Brand: SparkFun

If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At its heart, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cor...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: AF-3987 | Brand: Adafruit

Show off your maker spirit with the Adafruit Circuit Playground Lanyard, designed by artist Bruce Yan. This vibrant, double-sided lanyard features the beloved Circuit Playground characters in full colour on durable 2c...

SKU: DF-DFR0491 | Brand: DFRobot

The Gravity IO Expansion Shield breaks out all GPIO pins from the LattePanda into Gravity-compatible 3-pin colour-coded connectors, providing plug-and-play access to hundreds of Gravity sensors and modules. Each pin i...

SKU: AF-3213 | Brand: Adafruit

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit ...

SKU: AF-1590 | Brand: Adafruit

Have you gazed longingly at large TFT displays - you know what I'm talking about here, 4", 5" or 7" TFTs with up to 800x480 pixels. Then you look at your Arduino. You love your Arduino (you really do!) but there's ...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: AF-2157 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...

SKU: AF-2353 | Brand: Adafruit

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for...

SKU: AF-2278 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 4mm pitch features 2048 bright RGB LEDs in a 256×128mm panel. This mid-range pitch offers a good balance between pixel density and viewing distance, suitable for indoor displays vie...

SKU: DF-SEN0014 | Brand: DFRobot

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than o...

SKU: DF-ROB0021 | Brand: DFRobot

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two ...

SKU: DF-FIT0104 | Brand: DFRobot

A pack of ten 8-pin female headers with standard 2.54 mm pitch, designed for use with Arduino boards. These headers are ideal for replacing damaged headers, building custom shields, or prototyping on breadboards and p...

SKU: AF-2524 | Brand: Adafruit

This high-power RGB LED from Adafruit delivers serious brightness, with each red, green, and blue die capable of handling 350–750mA continuous current (2A peak). At 3W it produces approximately 150 lumens, scaling up ...

SKU: DF-FIT0511 | Brand: DFRobot

The Gravity 4Pin Sensor Adapter converts 4-pin sensors to the DFRobot Gravity interface, making it easy to connect compatible sensors to Gravity-enabled controllers. Features a press-type terminal for quick, tool-free...

SKU: DF-DFR0131 | Brand: DFRobot

Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw terminal can be screwed directly to the terminal on the thread and is reliabl...

SKU: DF-DFR0031-B | Brand: DFRobot

Piranha LED light module (Blue) , and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to A...