Arduino

SKU: SF-COM-15099 | Brand: SparkFun

Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in exchange gives you eight general purpose pins. You can s...

SKU: AF-1351 | Brand: Adafruit

A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards ...

SKU: AF-1484 | Brand: Adafruit

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 6mm pitch. The larger pitch provides good visibility at greater distances, making it suitable for signage and larger-scale displays. Pre-balanced white output...

SKU: SF-ROB-14538 | Brand: SparkFun

The SparkFun Haptic Motor Driver breakout board features the Texas Instruments DRV2605L, providing an easy way to add tactile feedback to your projects. Connect a vibration motor, communicate over I2C from any Arduino...

SKU: AF-1655 | Brand: Adafruit

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive...

SKU: AF-1759 | Brand: Adafruit

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the Sew-Your-Own Owl Kit (not included!) A tilt ball switch is used to trigger...

SKU: AF-2354 | Brand: Adafruit

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal fo...

SKU: DF-DFR0105 | Brand: DFRobot

Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this arduino power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and ot...

SKU: DF-DFR0021-G | Brand: DFRobot

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...

SKU: DF-DFR0021-B | Brand: DFRobot

This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...

SKU: DF-FIT0146 | Brand: DFRobot

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at st...

SKU: AF-2651 | Brand: Adafruit

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: SF-SEN-09269 | Brand: SparkFun

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: DF-DFR0171 | Brand: DFRobot

The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel se...

SKU: DF-SEN0130 | Brand: DFRobot

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...

SKU: DF-DFR0216 | Brand: DFRobot

DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or development . It is a simple microcontroller board fully compatible with Arduino UNO R3 and Arduino IDE open-sour...

SKU: SF-COM-08546 | Brand: SparkFun

A single-digit 7-segment LED display in red with a common anode configuration. Features two decimal point positions, with the right-side decimal point wired and functional. Key Features Single Digit 7-Segment – Com...

SKU: DF-DWG0003 | Brand: DFRobot

A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a c...