Arduino
Official Arduino boards, shields, kits, and compatible accessories. The open-source platform that started the maker movement. Uno, Mega, Nano, and more.
DC Barrel Jack Plug - Male
SKU: SF-PRT-11476 | Brand: SparkFun
This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder t...
Delivered by Wed 17 Jun
Gravity: Digital Push Button (Green)
SKU: DF-DFR0029-G | Brand: DFRobot
The DFRobot Gravity Digital Push Button (Green) is a simple momentary switch with an on-board LED indicator, designed for the Gravity interface system. It features an immersion gold PCB surface, a bright green cap, an...
Delivered by Fri 26 Jun
Gravity: Arduino LM35 Temperature Sensor
SKU: DF-DFR0023 | Brand: DFRobot
This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.The LM35 chip is produced by National Semiconductor Corporation and offers a fun...
Delivered by Wed 17 Jun
Adjustable breadboard power supply kit [v1.0]
SKU: AF-184 | Brand: Adafruit
Build your own breadboard-friendly adjustable power supply with this soldering kit. Based on the MIC2941 low-dropout regulator, it provides a guaranteed 1.25A output with only 40–400 mV dropout — far better than the L...
Delivered by Wed 17 Jun
Arduino Stackable Header Kit - R3
SKU: SF-PRT-11417 | Brand: SparkFun
These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit ...
Delivered by Wed 17 Jun
Arduino Stackable Header - 10 Pin
SKU: SF-PRT-11376 | Brand: SparkFun
A 10-pin female header with extra-long legs, designed for stacking Arduino R3-compatible shields. The extended pins pass through a shield's PCB and connect to the board below, letting you stack multiple shields on a s...
Delivered by Wed 17 Jun
Gravity: IO Sensor Shield For Arduino Mega Due
SKU: DF-DFR0165 | Brand: DFRobot
Say goodbye to messy cables and clueless pluging/unpluging! This Sensor Shield is a powerful expansion shield for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers...
Delivered by Wed 17 Jun
LilyTwinkle
SKU: SF-DEV-11364 | Brand: SparkFun
The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s...
Delivered by Wed 17 Jun
Gravity: Analog Ambient Light Sensor TEMT6000
SKU: DF-SEN0043 | Brand: DFRobot
An analog ambient light sensor based on the TEMT6000 detector, which has a spectral response closely matching the human eye with very low IR sensitivity. It outputs an analog voltage proportional to the ambient light ...
Delivered by Wed 17 Jun
Romeo BLE - Arduino Robot Control Board with Bluetooth 4.0
SKU: DF-DFR0305 | Brand: DFRobot
The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BL...
Delivered by Fri 26 Jun
2x2A Arduino Motor Shield Twin
SKU: DF-DRI0017 | Brand: DFRobot
The DFRobot 2×2A Motor Shield uses the L298P dual full-bridge driver chip to control two 4.8–35 V DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 10 and ...
Delivered by Wed 17 Jun
Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids
SKU: DF-KIT0090 | Brand: DFRobot
The Insectbot Hexa is a six-legged walking robot kit based on the Beetle BLE (Arduino-compatible with Bluetooth 4.0). Designed for kids and beginners, this DIY kit teaches soldering, assembly, and basic programming th...
Delivered by Fri 26 Jun
Jumper Wires Premium 6 F/F Pack of 100
SKU: SF-PRT-10898 | Brand: SparkFun
A pack of 100 premium female-to-female jumper wires, 155 mm long. Use these to connect any male header to another male header on breadboards, development boards, and breakout modules. Multiple jumpers can be installed...
Delivered by Fri 26 Jun
W5500 Ethernet with POE IOT Board (Arduino Compatible)
SKU: DF-DFR0342 | Brand: DFRobot
W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded E...
Delivered by Fri 26 Jun
Flex Sensor 2.2
SKU: SF-SEN-10264 | Brand: SparkFun
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...
Delivered by Wed 17 Jun
Arduino Motor Shield R3
SKU: DF-DFR0406 | Brand: DFRobot
INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two...
Delivered by Fri 26 Jun
Premium Male/Male Jumper Wires - 40 x 3 (75mm)
SKU: AF-759 | Brand: Adafruit
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male head...
Delivered by Wed 17 Jun
Micro Metal Geared Stepper Motor (12V 0.6kg.cm)
SKU: DF-FIT0503 | Brand: DFRobot
INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This product is suitable for the 3D printers and applications wh...
Delivered by Wed 17 Jun
Digital Sensor Cable For Arduino (10 Pack)
SKU: DF-FIT0011 | Brand: DFRobot
INTRODUCTION The digital sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our digital sensor to the IO board. This price inclu...
Delivered by Wed 17 Jun
Premium Female/Male 'Extension' Jumper Wires - 40 x 6 (150mm)
SKU: AF-826 | Brand: Adafruit
A ribbon of 40 premium female-to-male jumper wires, 150mm (6") long, in 10 rainbow colours (4 wires per colour). Each wire has a 0.1" (2.54mm) female header socket on one end and a 0.1" male pin on the other, fitting ...
Delivered by Wed 17 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
